Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Installation Across Margate
Window installation in Margate is governed by one of the strictest product standards in the country. Every permitted replacement must carry a Miami-Dade County Notice of Acceptance, because Margate sits entirely inside Broward’s High-Velocity Hurricane Zone. If the window you buy doesn’t hold that approval, the inspection fails and you’re back at the supply counter. We’ve handled hundreds of Margate window replacements, and we know the code requirements, the permit office’s expectations, and which product lines clear inspection the first time. Call (850) 303-7739 for a free estimate, and we’ll walk you through what your specific opening actually requires.
Why TruePane Windows & Doors Is Margate’s Preferred Window Installation Company
The name on the door matters less than the name on the paperwork. Dale Kessler founded TruePane in 2008 because he kept seeing the same failure: windows installed out of true, warranties voided on a technicality, homeowners left arguing with a company that had already moved on. That doesn’t happen here. Our technicians measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before the truck leaves your driveway. If the pane is not true, the job is not done.
Margate homeowners call us for a simple reason: a live person answers the phone 24 hours a day, seven days a week. Not a voicemail tree. Not a callback form. You call, a person picks up, and you get a straight answer about scheduling, pricing, or whether that old jalousie window is worth saving. We send background-checked, uniformed technicians into Margate homes, and they work the way they’d work in their own mother’s house.
For more than years, this company and the craft tradition behind it have served South Florida communities. We hire local, train apprentices into journeymen, and act like a company that plans to be in Margate thirty years from now. That’s why homeowners along Atlantic Boulevard, in the neighborhoods off Winfield Boulevard, and around Margate Boulevard keep our number in their phone.
Our Window Installation Services in Margate
Our full Window Installation team handles every opening in your home, from a single bedroom window to a complete whole-house replacement. In Margate, the work breaks down into a few categories that matter most given the housing stock and the HVHZ requirements.
Casement Windows
Casement windows are among the strongest designs for hurricane-prone areas. They seal tight against the frame, which helps them handle wind-driven rain better than a sliding sash. In Margate’s 1960s and 1970s CBS homes, we often swap out old jalousies and aluminum sliders for impact-rated casements that pass inspection and cut air leakage. Expect a typical Margate casement replacement to run $650-$1,100 per opening, depending on size and the NOA-rated product line you choose.

Sliding Windows
Sliding windows remain popular in Margate because they match the horizontal orientation of older mid-century homes. The problem is that pre-Andrew aluminum sliders from the 1970s and 1980s rarely meet current wind-load standards, and many have frames so corroded from Broward’s hard well water that a proper flashing detail becomes difficult. We replace them with fusion-welded vinyl or aluminum sliders carrying current Miami-Dade NOAs. Margate pricing for a standard slider typically lands between $450 and $850 per unit installed.

Fixed & Picture Windows
For fixed openings and large picture windows that frame a view, the product approval still applies in Margate. Fixed glass must carry the same NOA as any operable window because it faces the same debris-impact risk during a storm. These windows also handle heat gain, so we size the glass package to Margate’s year-round sun and humidity rather than pulling a stock unit off the shelf. A typical fixed or picture window replacement in Margate runs $400-$900 per opening, depending on glass package and frame material.

Awning Windows
Awning windows hinge at the top and open outward, which makes them useful in Margate’s denser residential lots where you want ventilation low on a wall, like above a kitchen sink or in a bath. They seal well under wind pressure when properly installed. Ask about an awning window if you’re replacing an old jalousie in a spot that takes direct afternoon sun. Margate awning replacements generally run $500-$950 per unit.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Margate
We’re an authorized installer for CGI, CWS, and ECO Window Systems, among more than a dozen manufacturer lines. That matters in Margate because each of these brands carries current Miami-Dade NOA approvals on the products we quote, and we can stand behind the factory warranty without a fight. We quote side by side on paper so you see exactly what you’re buying, what it costs, and which warranty layers apply. No stock-picked substitution, no surprise downgrade at install.
Common Window Installation Problems We See in Margate Homes
Margate’s housing stock has a particular set of failure patterns. Most homes went up between the late 1950s and the 1980s, well before Florida’s post-Hurricane Andrew code overhaul. That creates predictable problems when it comes time to replace windows:
- Non-NOA windows from big-box stores: A homeowner buys a window that isn’t approved for the HVHZ, we or another contractor install it, and the city inspector flags it. The result is a failed inspection, a stop-work order, and the cost of swapping the unit for one that actually carries a Miami-Dade NOA. That’s a painful and entirely avoidable lesson.
- Corroded jalousie frames: Margate’s municipal water supply comes from Broward’s well fields, and that hard water accelerates oxidation on aluminum window frames. By the time we open the wall, the old jalousie frame is often too far gone to flash properly, which leads to leaks at the jamb that show up only during the next hurricane season.
- Pre-Andrew sliding glass doors: Many Margate homes still hold original sliders from the 1970s. These fail wind-load testing and leak air constantly. Replacing them with impact-rated sliders carrying current NOAs closes a major code and energy gap.
- Condo associations replacing windows without SB 4-D coordination: Margate’s older condo communities now face Florida’s mandatory milestone inspections. When a board replaces windows without aligning that work with the structural recertification, the new units can still get flagged as non-compliant during inspection. The building fails twice, and owners pay for the same opening twice.
Pricing for Window Installation in Margate, FL
Window installation in Margate is not a commodity bid. A typical vinyl impact casement runs $650-$1,100 per opening installed. Sliding windows land between $450 and $850. Fixed and picture windows run $400-$900 depending on glass package. Bay and bow configurations, which we also install across Margate, run higher because they involve structural framing and multiple units. What moves the number is the product’s NOA status, the frame material, the glass package, and the condition of the rough opening once we open the wall. A cheap quote usually omits the permit, the Miami-Dade approved product, or the flashing detail that keeps water out. Our written quote includes all three. Call (850) 303-7739 and we’ll give you an exact price for your openings, free. A senior or veteran discount of 5% applies to every job, no paperwork games.
We Also Serve Cities Near Margate
This Window Installation in Margate service area extends to Coconut Creek, Coral Springs, Pompano Beach, and Fort Lauderdale. If your home sits just outside Margate’s city limits, the same crew and the same code-standard discipline apply. Call (850) 303-7739 and we’ll confirm coverage for your street.
Serving Margate, FL - Our Local Coverage Area
We’re based in the Margate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Margate
Yes. Margate is entirely inside Broward’s High-Velocity Hurricane Zone, and every permitted window replacement must carry a Miami-Dade County Notice of Acceptance. There is no exception for a simple swap. If the window doesn’t hold an NOA, the city inspector will not sign off, and you’ll be replacing the unit twice. Call (850) 303-7739 and we’ll quote only NOA-compliant product lines for your openings.
The cheap quote usually buys a non-impact unit without an NOA, or it skips the permit entirely, or it reuses an old flashing detail that doesn’t meet current code. When the Margate inspector opens the permit and checks the product approval, the job stops. Our quotes include the permit, the NOA-rated product, and the flashing work that passes the first time. Call (850) 303-7739 for a line-item quote and we’ll show you exactly what a compliant window job includes.
SB 4-D requires structural recertification for condo buildings 25 years and older, and window deficiencies are among the most common findings. If an association replaces windows without coordinating the milestone inspection, the new units can still fail the recertification. We handle multi-unit replacement contracts in Margate’s older communities and coordinate the product approvals and documentation so the window work actually satisfies the structural requirements. Call (850) 303-7739 for a community-wide assessment and bid.
Your windows need to meet the wind-load and debris-impact requirements set by Broward County’s HVHZ designation, which follows Miami-Dade product approval standards. The specific design pressure for your building depends on location, height, and exposure, but every window must hold a current Miami-Dade NOA. We calculate the design pressure for each opening and quote a product that meets it. Call (850) 303-7739 and we’ll verify the rating your home actually requires.
No. Insurers base the wind mitigation credit on the documented installation, which includes the permit and the product’s NOA. An unpermitted swap, regardless of the window’s quality, gives the carrier no basis to re-rate your policy. We pull the permit, pass the inspection, and hand you the documentation package that your insurer will actually accept. Call (850) 303-7739 for a free estimate and we’ll explain the paperwork trail for your specific home.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Margate and the surrounding South Florida communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After