Window Installation in Fort Lauderdale - Free In-Home Measure, Written Price

Fast, Reliable Window Installation Across Fort Lauderdale

Window installation in Fort Lauderdale means working inside the High-Velocity Hurricane Zone, where every replacement unit must carry Miami-Dade NOA or Florida Product Approval for impact resistance. A non-impact window can’t legally be permitted here, no matter what kind of shutters the house has. That changes the whole conversation. Our crews know the permit path, the product lines that pass, and the framing conditions hiding behind the stucco of a 1950s CBS home. If you’re replacing jalousies in Coral Ridge or swapping out aluminum sliders in Victoria Park, call (850) 303-7739 and we’ll walk you through it.

Call (850) 303-7739

Why TruePane Windows & Doors Is Fort Lauderdale’s Preferred Window Installation Company

TruePane has spent years in the glazing trade, and the work in Fort Lauderdale is its own discipline. This is not a market where you can drop in a standard vinyl window from a national catalog and call it done. The HVHZ mandate, the salt air off the intracoastal, the canal humidity, and the age of the housing stock all push against shortcuts. Our crews have opened enough walls in this city to know what’s waiting behind them: corroded jamb anchors, rotted wood bucks, and waterproofing that was never there in the first place.

Dale Kessler founded this company on a rule that’s still on the whiteboard: if the pane is not true, the job is not done. That rule governs every install we run in Fort Lauderdale, from a single fixed picture window in Colee Hammock to a full-home casement replacement off Las Olas. We hire local, train apprentices into journeymen, and send background-checked, uniformed technicians who measure every opening twice. We stand behind the work with our Done Right Promise, and we register both manufacturer warranty layers in writing before the truck leaves your driveway.

Our Window Installation Services in Fort Lauderdale

We install, replace, and service the full range of residential windows. In Fort Lauderdale, three styles do most of the work: casements, awnings, and sliders. Here’s how each one holds up in this climate, and what we see when we install them in older CBS construction.

Casement Windows

Casement windows are a natural fit for Fort Lauderdale’s HVHZ requirements because they’re among the strongest sealing designs you can buy. With fewer moving parts at the sash perimeter and crank-operated hardware that compresses the weatherstripping, they deliver better water and air resistance than a hung window in the same opening. In Coral Ridge and Victoria Park, we regularly replace original jalousies with impact-rated casement units. A quality impact casement window for a 1950s CBS home in Fort Lauderdale typically runs $900-$1,600 per opening installed, depending on size and manufacturer line.

Awning Windows

Awning windows hinge at the top and open outward, which makes them a smart choice for Fort Lauderdale’s afternoon rain pattern. The window naturally sheds water while still allowing ventilation, and in impact-rated form they hold up to HVHZ standards without any trade-off in air flow. Smaller awning windows in Fort Lauderdale generally run $500-$900 per unit installed, and they’re a good option for kitchens and bathrooms where opening space is limited.

Fixed & Picture Windows

A fixed or picture window offers the cleanest glass-to-frame ratio and the best energy performance of any style, because there are no sashes to leak air. For Fort Lauderdale homeowners who want natural light without cross-ventilation concerns, a fixed window is often the most cost-effective way to upgrade a wall. Impact-rated fixed windows in Fort Lauderdale start around $700-$1,200 per opening installed. On homes near the beach or along the Middle River, we recommend fused frames and laminated glass to handle both wind pressure and salt exposure.

Single & Double Hung Windows

Single and double hung windows are familiar to anyone in a two-story Fort Lauderdale home, but they require more attention to weatherstripping and balance systems than a casement or awning. In HVHZ applications, a hung window must be specified with impact-rated sashes, and the hardware has to hold up to repeated cycling in humid, salt-laden air. We install single and double hung windows in Fort Lauderdale at roughly $850-$1,500 per opening, with the higher end typically reflecting larger sizes or premium manufacturer lines like Marvin or Jeld-Wen.

Trusted Brands We Service in Fort Lauderdale

We’re an authorized installer for more than a dozen manufacturer lines, and in Fort Lauderdale we lean on the ones that have proven themselves in coastal Broward County. Marvin, Milgard, and Jeld-Wen are the three most common brands we specify here. Each one has product lines that carry the Miami-Dade NOA or Florida Product Approval Fort Lauderdale requires, and we quote them side by side on paper so you can see exactly what you’re paying for. We keep the hardware, sealants, and flashing materials for these systems on our trucks when we roll into Fort Lauderdale, which means fewer return trips and a faster turnaround on your install.

Common Window Installation Problems We See in Fort Lauderdale Homes

Older Fort Lauderdale homes present a pretty consistent set of conditions once the window comes out. Here’s what we find most often, and why it matters for your installation:

• Corroded aluminum jamb anchors. Salt-laden air off the intracoastal and inland canals pits aluminum within years. Anchors that looked fine from the outside are often brittle and unsafe once we remove the old window.
• Failed or missing flashing tape. Homes built in the 1950s through 1970s frequently have no flashing at the window perimeter. Water has been getting behind the stucco for decades, and the sheathing shows it.
• Rotted or undersized wood bucks. The wood frame surrounding the rough opening is often undersized or partially decayed. A simple retrofit turns into a full reframe if this isn’t caught before setting the new unit.
• Jerry-rigged unpermitted swaps. We’ve seen homeowners try to bypass the HVHZ mandate by installing non-impact windows under an old permit or no permit at all. It voids the insurance policy and becomes a problem at resale. We always pull the permit and install to code.

What Actually Happens When We Open the Walls on an Older Fort Lauderdale Home

This is where the conversation gets real. Fort Lauderdale sits entirely within the High-Velocity Hurricane Zone, one of only two counties in the U.S. where every window replacement must carry Miami-Dade NOA or Florida Product Approval for impact resistance. That means a non-impact product can’t even be permitted here, regardless of any shutter plans. It’s not a preference question. It’s a code question.

Compounding that, the city’s 300-plus miles of inland canals, the “Venice of America” network, push salt-laden air far inland. Material selection is not cosmetic. We spec corrosion-resistant hardware and marine-grade flashing on every canal-adjacent job.

Once the stucco is open, we inspect the framing, the waterproofing, and the anchorage before we set anything. If we find rotted wood bucks or missing flashing, we stop, write up what needs to happen, and get your approval in writing before we touch it. That’s a square deal. The allowance language goes into the contract from the start so you know what a worst-case reframe costs before the first tool leaves the truck.

On a 1960s CBS home in Coral Ridge, our crew replaced original jalousie windows with impact-rated casement units after the homeowner received a Citizens Insurance non-renewal. Once the stucco was opened, we found corroded aluminum jamb anchors and failed flashing tape around every opening. We reframed the pockets, installed new pressure-treated bucks, and flashed with self-adhered membrane before setting fusion-welded frames. The final inspection passed with the new NOA stickers in place, and the homeowner’s policy was reinstated. That’s what a Fort Lauderdale window job looks like when it’s done right.

Pricing for Window Installation in Fort Lauderdale, FL

We Also Serve Cities Near Fort Lauderdale

Our Fort Lauderdale customers are never too far from the crews that know this work. We run the same HVHZ-compliant installations and true-pane standards from Pompano Beach to Coconut Creek, Margate, and Coral Springs. If you’re just outside the city and need Window Installation work done by a team that knows Broward County code, call us. We’ll bring the same inspection-first, surprise-proof approach to Fort Lauderdale‘s neighbors.

FAQs - Window Installation in Fort Lauderdale