Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterAndersen Windows & Doors in Sunrise, FL | TruePane Windows & Doors
If you own an Andersen window or door in Sunrise that’s sticking, fogging, or leaking air, here’s the short answer: we service every Andersen line installed across this city, from 1960s Woodwright double-hungs to modern 400 Series casements, and we’re usually able to repair rather than replace. The thing that sets our Andersen work apart in Sunrise is simple: we measure every opening in three places before we order anything, because in this city the ground settles and the openings shift. Most Andersen failures we see here trace back to out-of-square frames and relentless ground-level humidity, not manufacturing defects. Call (850) 303-7739 for a free estimate, and we’ll tell you straight what the repair actually needs.
TruePane Windows & Doors is an independent Andersen service provider. We are not manufacturer-affiliated, not an Andersen-owned operation, and not bound to sell you a new window when a sash replacement and some stainless hardware would do the job for a third of the price. Dale Kessler founded this company in 2008 on a rule his father taught him working weekends on neighbors’ windows: if the pane is not true, the job is not done. That rule means something specific in Sunrise, where the drained Everglades soil under this city has been settling since the first slab was poured, and where a window measured once and ordered blind will never seat right. We’ve served Sunrise homeowners for years, and we carry the Andersen OEM hardware, weatherstripping, and glass that this city’s humidity demands.
If you’re weighing repair against replacement, or you just want a second opinion on a quote you already have, we’re glad to look. Andersen sales & service is our bread and butter across Broward County, and Sunrise is one of the cities we know best. Call (850) 303-7739 and a live person answers, any hour, any day.
Why Sunrise Residents Choose Us for Andersen Service
We’ve been inside enough Andersen windows in Sunrise to know what holds up and what doesn’t. The 400 Series wood-core casements and Frenchwood gliding doors that went into so many 1980s CBS homes here are good equipment, but they were engineered for tighter framing tolerances than Sunrise’s settling soil often provides. When a sash binds or a corner gasket leaks, the fix usually isn’t a new window. It’s a shimmed frame, a fresh OEM weatherstrip, and a technician who measures twice before touching a screwdriver.
Dale grew up off Oakland Park Boulevard in Lauderhill, spent weekends as a kid caulking and reglazing windows for neighbors who couldn’t afford a service call, and sharpened the technical side at Broward College’s construction trades program in the early 1990s. For the better part of three decades he’s been setting and sealing windows across this county. His crew works on Andersen equipment in Sunrise daily, and we don’t guess at tolerances. If the spec sheet doesn’t back it up, we don’t say it.
Every job we take runs on the same terms: the Done Right Promise, The Keystone Standard with both warranty layers registered in writing before our truck leaves your driveway, and upfront pricing in a written line-item quote. No paperwork fights. No arguing. In Sunrise, where HOA rules on frame color and grid pattern layer on top of Broward impact code, we handle the permit and approval side too, because we’ve learned which communities take weeks and which take days. We’ll be there when we say.
Common Andersen Windows & Doors Problems We Solve in Sunrise
- Corner gasket and weatherstrip compression set on 400 Series casements. Ground-level humidity in Sunrise is persistent, and over years it flattens the original compression weatherstripping around the sash corners. You feel a draft, see condensation between the glass, or hear the wind whistle at the lock rail. We replace the OEM gaskets and weatherstrip, then square the sash to the jamb.
- Sill rot on 200 Series and Woodwright double-hungs from sprinkler overspray. Sunrise sits on high-moisture, low-drainage soil, and when irrigation hits an east-facing sill every morning, the wood swells and rots at the bottom corners. We cut out the rot, splice in new material, and seal the sill with a profile that sheds water instead of holding it.
- Glide stick and roller failure on Frenchwood sliding doors. Fine muck and calcium from reclaimed-water irrigation collect in the sill track over the years. The rollers grind, the door drags, and eventually the glide blocks crack. We clean out the track, replace the rollers and glides with OEM components, and adjust the door so it rides level.
- Out-of-square rough openings causing sashes to bind or fail to latch. This is a Sunrise specialty. The soil under this city shifts a little every year, and a frame that was square in 1982 won’t be square now. We measure each opening in three places, shim the frame to re-plumb the opening, and set the sash to seal tight against the jamb.
- Warped and swollen wood sashes on older A-Series windows from persistent humidity. Some of the higher-end custom homes in Sunrise have A-Series architectural windows, and the wood swells in this climate. Operation goes stiff, the sash sticks, and the finish starts to cloud. We restore clearance where the window allows, and replace sashes only when the frame is no longer salvageable.
Andersen Service in Sunrise: What Local Conditions Mean for Your Equipment
Here’s the thing about Sunrise that most window crews from Fort Lauderdale or Plantation miss: almost every Andersen window or door from the original build sits in a rough opening that has shifted out of square as the drained Everglades soil beneath settles. This city was built out almost entirely between the 1960s and 1980s on wetland that was drained and filled, and that fill is still moving. We’ve measured hundreds of openings in Sunrise homes, and it’s rare to find one that’s plumb and square within an eighth of an inch. When a crew skips that measurement and orders a standard-size replacement, the new window goes in, the flashing gaps open, and the air leaks come back within a season. That’s why our standard practice in Sunrise is to measure each opening in three places, then order custom Andersen replacement frames or adjust the jambs on-site. It’s slower on the front end, but the window actually latches, seals, and drains the way Andersen designed it to.
Last May our crew pulled a 1982 Andersen 400 Series casement from a villa in Sunrise Golf Village that would not close against the jamb. The top hinge side measured 3/8 inch out of square and the lower weatherstrip was compressed flat from years of settling. We ordered a custom-sized Andersen 400 Series replacement sash with new stainless hardware, shimmed the frame to square, and re-flashed the opening to meet Broward impact code. Now the homeowner can latch it with two fingers and the inspector passed it first visit. That’s the kind of repair you get when someone treats the ground under your house as part of the window system.
Andersen Models & Products We Service in Sunrise
We service every Andersen line you’re likely to find in a Sunrise home. The 400 Series wood-core, vinyl-clad casements and double-hungs that went into 1980s and 1990s renovations are the ones we see most. The 200 Series Perma-Shield windows show up regularly in villa and townhome communities like Sunrise Golf Village, where they replaced original aluminum units under early-2000s HOA programs. Frenchwood gliding and hinged patio doors are original to many 1970s and 1980s CBS homes, and we still stock the glide blocks, rollers, and weatherstrip to keep them running. A-Series architectural windows turn up in a handful of newer custom homes, and yes, we work on those too.
On parts, we use Andersen OEM replacement hardware, weatherstripping, and glass whenever available, because this city’s humidity demands exact tolerances. For discontinued models where Andersen no longer stocks the part, we source quality aftermarket equivalents that match the original profile and seal. We repair when the sash, frame, and operator are salvageable, and recommend full frame replacement only when the rough opening is beyond adjusting or the frame shows advanced rot. That’s the honest line, and it saves you money.
Andersen Service Pricing in Sunrise
Andersen service pricing in Sunrise depends on what we find when we open your window or door up. A straightforward hardware replacement, weatherstripping, or sash adjustment typically runs between $180 and $450, including the OEM parts. A full sash replacement with new glazing, hardware, and frame shimming runs $500 to $1,200 per window, depending on the series and size. A Frenchwood door roller and glide rebuild, including track cleanup and adjustment, usually lands between $220 and $400. Full frame replacement with a new Andersen impact-rated window starts around $900 per opening and climbs with size, glass package, and permit requirements, which in Sunrise include Florida Product Approval documentation and HOA sign-off where applicable.
If you’re budgeting for this work, know that Broward impact code applies to any permitted replacement in Sunrise, no exceptions, and HOA-driven color and grid requirements can extend lead times by a couple of weeks. Both are manageable if they’re planned for. A free estimate from us includes a written breakdown of parts, labor, permit costs if any, and a firm price before we order anything. Call (850) 303-7739 and we’ll get you that number.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Andersen Windows & Doors in Sunrise
Yes, they can. Andersen produces impact-rated 400 Series and A-Series windows in several frame colors and grid patterns, but the HOA must approve the exact combination before the order is placed. For villas in Sunrise Golf Village and similar 1970s communities, we check the deed restrictions, submit the spec to the association, and only order once we have written approval. It adds a week or two to the schedule, but it avoids a do-over with the board and a window you can’t change. Call (850) 303-7739 and we’ll walk you through the approval sequence for your community.
In almost every case it’s repairable. The sticking comes from a combination of fine muck and calcium deposits in the sill track, worn glide blocks, and a frame that has settled slightly out of square over the years. We clean the track, replace the rollers and glides with OEM parts, and shim the frame back to level. You’ll slide it with one hand after we’re done. If the door panel itself is cracked or the glass is failed, we replace the panel, but the frame usually stays.
We do both, and in Sunrise full frame replacement is often the right call even when an insert would be faster. This city’s settling soil routinely leaves rough openings out of square, and an insert replacement installed into a racked opening will leak air around the perimeter within a couple of seasons. When we do a full frame tear-out, we measure the opening in three places, order a custom-sized Andersen frame, shim it plumb and square, and flash it to meet Broward impact code. It’s the only repair that fixes the problem permanently.
Sometimes, but not always. If the existing frame is square, structurally sound, and the right profile for an impact-rated sash, we can retrofit impact glass into the original Andersen frame and bring the opening up to code. For older Woodwright and some 200 Series frames, retrofit isn’t an option because the frame profile is too thin for the weight of impact glass. We’ll tell you honestly which side of that line your windows fall on, and what the better long-term number is.
First, close the window and run your hand around the lower corners. If you feel a draft, the corner gaskets and weatherstrip have compressed from years of Sunrise humidity, and likely the sash has sagged as the jamb settled out of square. Don’t crank the operator to force a seal, you’ll bend the hardware. Call us at (850) 303-7739. We’ll replace the OEM gaskets, shim the frame to square, and set the sash so it seals tight against the jamb, then test it with a smoke pencil so you know the leak is gone.
Service Areas Near Sunrise
We work across Sunrise service area and the surrounding cities: Andersen service in Lauderhill, Andersen service in Lauderdale Lakes, Tamarac, North Lauderdale, and Oakland Park. If you’re in a neighborhood close to the Sunrise line, call and ask, chances are we’re already working nearby.
Book Your Andersen Service in Sunrise Today
If your Andersen window or door is failing in Sunrise, call (850) 303-7739 for a free estimate. We’ll measure, diagnose, and give you a written price before any work starts. A live person answers, any hour, any day.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Sunrise since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.