Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Andersen Windows & Doors in Lauderdale Lakes, FL | TruePane Windows & Doors
We’re the independent Andersen service crew that works on Lauderdale Lakes’ aging CBS ranch homes and low-rise condos, where original aluminum and jalousie windows are getting flagged by insurers faster than homeowners can get quotes. TruePane Windows & Doors handles Andersen repair, retrofit, and Window Installation - Lauderdale Lakes, with a live person answering every call at (850) 303-7739. Dale Kessler runs the shop the way his father taught him: measure twice, set true, register both warranty layers before the truck leaves the driveway. If you own an Andersen unit in Lauderdale Lakes, we know exactly what your house is doing to it.
Why Lauderdale Lakes Residents Choose Us for Andersen Service
We’ve spent years pulling Andersen sashes out of Lauderdale Lakes homes and seeing the same failures repeat. 400 Series Tilt-Wash bottom rails wicking moisture from wind-driven rain. E-Series aluminum cladding oxidizing at the miter joints from salt-laden air. Perma-Shield doors binding in frames that swell through a humid summer. That field knowledge means we don’t guess at your Andersen problem, we’ve likely already fixed it three streets over. Andersen sales & service work here takes a specific skill set because the housing stock is so uniform: CBS block, stucco, pressure-treated bucks, and a retrofit requirement stricter than anything you’ll find in most of the country.
Dale grew up off Oakland Park Boulevard in Lauderhill, where his father spent weekends caulking and reglazing windows for neighbors who couldn’t afford to call anyone. What started as a kid learning to keep a bead straight became a three-decade trade across Broward County, sharpened at Broward College’s construction trades program. We still approach every Andersen job in Lauderdale Lakes the same way: if the spec sheet doesn’t back it up, we don’t say it.
Common Andersen Windows & Doors Problems We Solve in Lauderdale Lakes
- Rot at the bottom rail on 400 Series Tilt-Wash units. Lauderdale Lakes stucco sills trap moisture against the frame after every afternoon storm, and wind-driven rain works into the vinyl-clad wood. By the time you see peeling finish or a sagging sash, the rail is usually soft. We cut out the rot or replace the sash if it’s past 20% of the rail.
- Filiform corrosion on E-Series aluminum-clad frames. Salt air off the Atlantic makes its way inland and settles into the miter joints on aluminum-clad Andersen units. You’ll see white oxide licks creeping under the coating. We strip, treat, and refinish those joints before the extrusion itself starts pitting.
- Perma-Shield doors sticking in humid summer. East-facing entries without shade get baked all morning, then soaked all afternoon. The slab swells, the jamb shifts, and the door binds. We re-plane the door edge, adjust hinges, and add weatherstripping that can take the moisture without grabbing.
- Jalousie windows that can’t pass an insurance inspection. A huge share of Lauderdale Lakes homes still have louvered glass. Insurers flag them outright. We swap those openings to Andersen awning or casement units with NOA-listed impact laminate, usually with a full tear-out of the old aluminum subsill.
- Andersen windows retrofit incorrectly into CBS openings. We see direct-set Andersen frames butted into concrete block without a pressure-treated buck, which means the frame can’t drain and the flashing fails within a few seasons. If the spec sheet doesn’t back it up, we don’t say it - and we don’t leave a bad install in place either.
Andersen Service in Lauderdale Lakes: What Local Conditions Mean for Your Equipment
Here’s the thing that separates Lauderdale Lakes from Sunrise, Tamarac, or Lauderhill on an Andersen job: almost every home here is concrete block with stucco, which means a replacement Andersen window needs a pressure-treated wood buck lag-bolted through the stucco into the CBS. This is not a minor detail. In a wood-framed house, the Andersen unit nails directly to the studs. In Lauderdale Lakes, the buck creates a plumb, level, drained opening that the Andersen frame fastens into, and it’s the single biggest line-item homeowners forget to budget when they’re pricing the job. It also changes how we flash and seal: the buck gets a sill pan, backer rod, and a proper stucco patch around the exterior flange. Skip the buck and the window will leak, the stucco will crack, and you’ll be calling us back before the next hurricane season.
In the Oakland Estates section, our crew pulled a 400 Series Tilt-Wash that had rotted through the bottom rail after years of sprinkler splash from a CBS planter box. The homeowner had the window replaced once before, direct-set, and the original stucco work held water against the frame like a cup. We rebuilt the opening with a PT buck, set a new 400 Series double-hung with Miami-Dade-approved impact laminate, and stucco-patched to match the original sand finish before the homeowners’ four-point inspection deadline. That’s the difference between doing the job and doing it right in this city.
Andersen Models & Products We Service in Lauderdale Lakes
We work on the full Andersen line that shows up in Lauderdale Lakes homes: 200 Series Narroline, 400 Series Tilt-Wash, A-Series with Fibrex exteriors, and E-Series aluminum-clad wood. For sashes, balances, and weatherstripping where geometry matters, we use genuine Andersen parts. For impact retrofit, we’ll drop an NOA-listed laminate into the existing Andersen frame when the frame itself is still sound. We keep common Andersen balance assemblies, sash locks, and weatherstripping profiles stocked locally so a Lauderdale Lakes service call doesn’t turn into a two-week parts wait. Full frame replacements get quoted line by line on paper, with both manufacturer warranty layers registered in writing before we leave your driveway.
Andersen Service Pricing in Lauderdale Lakes
What you’ll pay depends on what your Andersen unit needs and what your house is made of. Here’s what we see across Lauderdale Lakes:
- Andersen sash replacement (single unit, laminated glass): $400-$800 installed
- Tilt-Wash balance or weatherstripping repair: $150-$350 per window
- Full-frame Andersen replacement into CBS with PT buck and stucco patch: $1,200-$2,800 per opening, depending on impact rating and finish work
- Jalousie-to-Andersen awning conversion: $950-$1,900 per opening with tear-out and disposal
The PT buck, the stucco patch, and whether the unit carries an NOA all move the number. A free estimate gives you the exact figure for your house, on paper, before any work starts. Call (850) 303-7739 and we’ll come measure the openings ourselves.
Serving Lauderdale Lakes, FL - Our Local Coverage Area
We’re based in the Lauderdale Lakes area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Andersen Windows & Doors in Lauderdale Lakes
Yes, if the existing Andersen frame is still structurally sound and properly flashed, we can strip the old sash and drop in an NOA-listed impact laminate that fits the Andersen frame pocket. This works for many 400 Series and A-Series units. If the frame has rot beyond 20% of the rail, has shifted, or was direct-set without a buck, we’ll recommend full replacement instead. Call (850) 303-7739 and we’ll tell you which path applies to your openings.
Humidity and heat cycles swell the door slab and the jamb. Lauderdale Lakes summers push moisture into wood core doors, especially on un-shaded east-facing entries that get baked all morning. The fix usually involves re-planing the door edge, adjusting the hinges, and replacing weatherstripping that has taken a set. We do this without pulling the entire door unless the frame itself has moved. Call (850) 303-7739 for Door Installation - Lauderdale Lakes that leaves you with a door that closes without a fight.
Yes. Andersen awning units seal tight when closed, take impact laminate cleanly, and work well in low-rise condo openings where jalousies were original. The catch in Lauderdale Lakes is the original aluminum subsill: it’s almost never flashed correctly, so the tear-out has to go all the way down to the rough opening before we set the new Andersen frame. We handle that from demo to stucco patch, including the association-required paperwork if your condo board needs it.
You need the buck. A direct-set Andersen frame in a CBS wall can’t drain, can’t be flashed properly, and will fail within a few seasons. The pressure-treated buck lag-bolted into the block gives the frame something solid to fasten to and creates the drainage plane the opening needs. We’ve pulled enough direct-set failures in Lauderdale Lakes to know this is not a corner worth cutting.
Look for an NOA sticker or etched marking on the glass, and check that the frame sits in a proper buck with a visible stucco patch around the exterior flange, not caulked directly to the block. If you’re not sure, we inspect the opening and tell you exactly what’s there. In Lauderdale Lakes, a four-point inspection will find what’s wrong eventually; better to know before your insurer does. Call (850) 303-7739 and we’ll take a look.
Service Areas Near Lauderdale Lakes
We run Andersen service calls across the surrounding communities: Lauderdale Lakes service area is home base, but we’re also in Andersen service in Sunrise, Andersen service in Lauderhill, Tamarac, North Lauderdale, and Oakland Park. If your house is CBS with original aluminum or jalousie windows, we know the opening before we arrive.
Book Your Andersen Service in Lauderdale Lakes Today
Call (850) 303-7739 and a real person answers. Tell us what your Andersen window or door is doing and we’ll schedule a time that works. The estimate is free, the pricing is on paper, and the work carries our Done Right Promise. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lauderdale Lakes and Broward County since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After