Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Sunrise
Window replacement in Sunrise, FL is not a one-size-fits-all job, and nobody who has lived here through a hurricane season needs that explained. Most homes in Sunrise were built between the 1960s and 1980s, which means original single-pane aluminum frames that no longer meet Broward County’s high-velocity hurricane zone code. A compliant replacement has to carry a Florida Product Approval rating, pass a county inspection, and in many Sunrise villa communities, clear an HOA architectural review first. TruePane Windows & Doors has walked Sunrise homeowners through that process for years, and we quote the work on paper before anything gets ordered. Call (850) 303-7739 for a free estimate, and we will lay out exactly what your opening needs and why.
Why TruePane Windows & Doors Is Sunrise’s Preferred Window Replacement Company
We are not the cheapest bid in Sunrise, and we do not pretend otherwise. What we bring to a Sunrise home is a second-generation glazier’s craft standard, backed by a Done Right Promise and a warranty registration process that puts both manufacturer layers in writing before our truck leaves your driveway. Dale Kessler founded TruePane in 2008 with one rule on the whiteboard: if the pane is not true, the job is not done. That rule governs every opening we set in Sunrise, from a villa slider off Sunset Strip to a CBS ranch near Welleby Park.
Our technicians live and work in South Florida. They know what settled muck soil does to a 1970s rough opening, and they know that a Sunrise Golf Village HOA will not approve a grid pattern it does not recognize. When you call, a live person answers, 24 hours a day. Not a callback queue, not a regional center. When we give you a quote, it is upfront and line-itemed. When we schedule, we show up when we say, uniformed and background-checked. That is the square deal Sunrise homeowners tell us they were looking for after a previous contractor left them with a fogged seal and a door that binds in July.
Our Window Replacement Services in Sunrise
Sunrise housing stock demands a specific set of window replacement approaches. For most homes, the conversation starts with the same question: can the existing frame be saved, or does the whole opening need to come out. In Sunrise, the answer is usually the latter. Here is what we do most often across the city.
Full Frame Replacement
Full frame replacement is the standard for Sunrise homes built atop drained Everglades wetland. The soil here retains moisture and keeps settling, which means rough openings in 50-year-old CBS homes are rarely square anymore. A full tear-out lets us shim, flash, and square the opening properly before the new impact-rated unit goes in. That is a code-compliant install, not a workaround. In Sunrise, a full frame replacement typically runs $900-$2,100 per opening depending on size, manufacturer, and whether the opening needs jamb repair.
Insert Window Replacement
An insert replacement, sometimes called a pocket window, fits a new sash and frame inside the existing opening without disturbing the surrounding stucco or trim. It works on Sunrise homes where the original frame is still square and structurally sound. Given our soil conditions, maybe one in five Sunrise callers is actually a good insert candidate. We measure every opening twice before recommending one. Inserts in Sunrise run $600-$1,400 per window, but the savings disappear fast if the frame underneath is out of square and the job fails inspection.
Storm Window Replacement
Storm window replacement in Sunrise means impact-rated glazing that meets Florida Product Approval standards. The county’s high-velocity hurricane zone designation applies citywide, no inland exemption. A storm window here is not an add-on. It is the window. We quote manufacturers side by side on paper, CGI and ES Windows among them, so you see exactly what rating you are buying and what it costs per opening before you sign anything.
Energy-Efficient Upgrade
Replacing original single-pane aluminum with low-E, argon-filled impact glass changes how a Sunrise house feels in August and what it costs to cool. The combination of Broward humidity and 45-year-old aluminum frames means most of our Sunrise customers are upgrading for hurricane protection and energy savings in the same job. We will show you the U-factor and solar heat gain coefficient on each manufacturer line we quote, and register both warranty layers in writing before the truck leaves your street. Energy-efficient upgrades in Sunrise generally run $800-$1,900 per window.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunrise
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Sunrise work we lean on brands engineered for high-velocity hurricane zones. CGI, ES Windows, and ECO Window Systems are three we quote regularly here, alongside the national names homeowners recognize. Because we maintain relationships with regional distributors and stock common Sunrise replacement parts locally, turnaround on orders is measured in days, not months. The important thing is this: you see the manufacturer, the model, and the impact rating on paper for each line we quote, side by side, no vague promises about “hurricane glass.”
Common Window Replacement Problems We See in Sunrise Homes
- Out-of-square rough openings from settled Everglades soil. The organically rich, high-moisture ground under Sunrise shifts continuously. A 1970s CBS opening that looks square can be a half-inch out, which is enough to fail a county inspection on an insert retrofit.
- HOA stop-work orders over grid patterns and frame colors. Sunrise has dozens of deed-restricted villa and townhome communities, Sunrise Golf Village among them. An installer who skips the architectural review can get your job shut down mid-install over something as simple as a colonial grid the board never approved.
- Non-impact units installed without Florida Product Approval. Some contractors quote non-impact insulated glass at a lower price and call it a deal. In Sunrise, that opening will not pass the county’s wind-load review, and your insurer may deny a storm claim on it later.
- Corroded aluminum frames and failed seals. The persistent ground-level humidity here corrodes thin-wall aluminum and degrades vinyl weatherstripping faster than coastal cities with sandier drainage. Fogged glass is the visible symptom; the structural rot underneath is the real problem.
Pricing for Window Replacement in Sunrise, FL
Window replacement pricing in Sunrise reflects the code requirements, not just the glass. A basic insert in a small villa opening starts around $600. A full frame replacement with an impact-rated, low-E unit from CGI or ES Windows typically falls between $900 and $2,100 per window. Sliding glass doors run higher, $2,500-$6,000, because the opening is larger and the impact requirement on a lite that size is more demanding. What moves the number: the opening’s condition, the manufacturer line, the glazing package, and whether an HOA review adds time. A compliant quote includes the permit, the Florida Product Approval documentation, and both warranty layers registered in writing. A cheap quote often leaves one of those out. Call (850) 303-7739 and we will give you a written, line-item estimate for your specific openings.
We Also Serve Cities Near Sunrise
Our Window Replacement crews work throughout northwest Broward, and we regularly quote jobs in Lauderhill, Lauderdale Lakes, Tamarac, and North Lauderdale. The code requirements change once you cross out of Sunrise’s city limits, so if you are in one of those nearby cities, we will verify the exact wind-load and permitting standard that applies to your address before quoting. When you are ready to see what a full Window Replacement in Sunrise quote includes, call us and we will schedule a measurement visit.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Sunrise
In Sunrise, every permitted replacement window must carry a Florida Product Approval rating for the high-velocity hurricane zone, meaning the unit is tested and approved for the wind pressures specific to your home’s location and exposure. There is no inland exemption in Sunrise. The approved rating is printed on the product approval document, which we include in your quote packet and leave with you after install. Call (850) 303-7739 and we will pull the exact rating your opening requires.
Most Sunrise homes need full frame replacement because the rough openings are no longer square. The city was built on drained Everglades wetland, and the organic soil keeps settling decades later. An insert placed in an out-of-square opening cannot be properly squared, shimmed, and sealed, which is why these jobs fail Broward County inspection. We measure every opening twice and only recommend an insert when the frame is still true. For an exact assessment of your openings, call (850) 303-7739 and schedule a free estimate.
Yes. Many Sunrise villa and townhome communities, including Sunrise Golf Village, have deed restrictions that govern frame color, grid pattern, and sometimes even the style of window you may install. The HOA review runs on top of the county permit process, not instead of it. We walk every Sunrise job through both layers before ordering product, so you do not get a stop-work order mid-install. If you are not sure what your HOA requires, call (850) 303-7739 and we will help you find out.
A documented Florida Product Approval rating is often the difference between a paid claim and a denied one after a wind event. Insurers in Broward County will ask whether the damaged opening was code-compliant at the time of install. If a contractor put in non-impact glass without the required rating, the insurer can reject the claim. We register both manufacturer warranty layers and provide the product approval documentation for every Sunrise install before we leave the driveway. To see exactly what a compliant quote includes, call (850) 303-7739 for a free estimate.
Yes, and in Sunrise the difference is measurable. Original single-pane aluminum windows from the 1970s and 1980s have almost no insulating value, and the aluminum frames conduct heat straight into the house. Replacing them with low-E, argon-filled impact units reduces the load on your air conditioner in a climate where the AC runs hard for eight months a year. Most Sunrise homeowners see the savings spread across the cooling season, not in one dramatic bill. We will show you the U-factor and solar heat gain coefficient for each line we quote so you can compare the numbers yourself. Call (850) 303-7739 and we will quote your home specifically.
Written by Dale Kessler, Owner at TruePane Windows & Doors. Serving Sunrise, FL with window and door replacement backed by the Keystone Standard and the Done Right Promise.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.