Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Coral Springs
Window replacement in Coral Springs runs $650-$1,450 per opening for a standard insert and $1,200-$2,800 per opening for a full-frame replacement, and the work almost always requires an HVHZ-certified product plus a city permit. We’ve been setting windows in Coral Springs long enough to know the inspection drill, the HOA color specs, and which jalousie frames are beyond saving. If you’re looking at fogged panes, failing seals, or windows that sweat through every Coral Springs summer afternoon, call (850) 303-7739 and we’ll walk you through what’s worth replacing and what isn’t.
Why TruePane Windows & Doors Is Coral Springs’s Preferred Window Replacement Company
TruePane came out of a simple frustration: too many homeowners in Coral Springs were getting windows that passed a building inspection but failed the homeowner within a season or two. Dale Kessler started the company in 2008 as a second-generation glazier who’d seen enough fogged seals and binding frames to know the difference between a job that looks fine at the curb and a job that’s actually done right. We carry that same standard into every Coral Springs neighborhood we work, from The Hills to Cypress Run to the streets off Wiles Road and University Drive.
We don’t send out callbacks or subcontractors. The crew that measures your openings is background-checked, uniformed, and employed by TruePane. We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before the truck leaves your driveway. That’s The Keystone Standard, and it’s why Coral Springs homeowners who’ve been burned once by a cheap install tend to stay with us for the next window, then the next one.
Coral Springs presents its own set of rules, and we know them cold. Broward County’s High Velocity Hurricane Zone requirements, HOA architectural review boards that specify bronze anodized frames on streets that were master-planned in the 1970s, and concrete-block construction that demands careful flashing work. The Done Right Promise backs every job: if it’s not done right, we make it right, no paperwork, no arguing. That’s the founding rule Dale Kessler keeps on the board: if the pane is not true, the job is not done.
Our Window Replacement Services in Coral Springs
Full Frame Replacement
Full frame replacement means removing the entire existing window down to the rough opening and setting a new unit with new jambs, new trim, and new flashing. In Coral Springs, where most homes are CBS construction from the 1970s through early 1990s, full frame work lets us correct the original builder’s stucco rough openings and get proper flashing tape into the concrete block. This is the right call when wood or aluminum frames have rotted or corroded, when the existing opening is out of square, or when you want to upgrade from the original single-pane aluminum to a modern HVHZ-certified impact unit. Full frame replacement in Coral Springs typically runs $1,200-$2,800 per opening depending on window size and product line.
Insert Window Replacement
Insert replacement fits a new window inside the existing frame, which costs less and disturbs less stucco. It works well in Coral Springs when the original aluminum frame is still sound and square and the homeowner wants to keep the exterior appearance intact, particularly in HOAs that require approval for any visible change. The catch: some Westinghouse-era aluminum frames in Coral Springs have corroded at the corners or pulled away from the concrete block over 40 years of humidity and afternoon thunderstorms. If the frame is compromised, an insert won’t hold, and we’ll tell you that before you spend the money. Inserts in Coral Springs typically run $650-$1,450 per window.
Storm Window Replacement
Some Coral Springs homes still have original storm window setups or aging single-pane units that offer no wind-borne debris protection. Given that Coral Springs sits inside Broward County’s High Velocity Hurricane Zone, any replacement touched by a contractor must carry Miami-Dade or Broward Notice of Acceptance approval. That’s not a suggestion, it’s a code requirement. We quote HVHZ-certified products only, and we’ll explain what the NOA number means and why it matters at your inspection. A storm-rated replacement in Coral Springs starts around $900 per opening for a basic single-hung and climbs with size and frame material.
Energy-Efficient Upgrade
Energy-efficient windows in Coral Springs aren’t just about the electric bill, they’re about surviving a June afternoon without the AC running nonstop. Many original windows in this city carry single-pane glass with U-factors north of 0.80; modern argon-filled low-E insulated units come in at 0.25-0.30, and that difference shows up in how a room feels within a week. We’ve replaced decades-old jalousie windows in enclosed Florida rooms with fusion-welded Simonton casements and watched the room stop sweating. Pair the glass with a proper Low-E coating and you’ll cut solar heat gain through west-facing windows on streets like Ramblewood Drive. Energy-efficient upgrades in Coral Springs run roughly $700-$1,600 per opening and often pay for themselves fastest in rooms with original aluminum frames.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Coral Springs
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Coral Springs we lean on the products that hold up under Broward County’s HVHZ inspection and the area’s humidity. We quote Simonton, PGT, and CGI regularly for impact applications, alongside Andersen, Pella, Marvin, and Milgard for higher-end and custom work. Because we’re an authorized installer rather than a broker, we can register both manufacturer warranty layers in writing before we leave the driveway, which means if something fails in year seven, the warranty claim doesn’t die in a phone tree. We keep standard NoA documentation and common hardware in the truck, so projects in Coral Springs don’t stall waiting on parts from another state.
Common Window Replacement Problems We See in Coral Springs Homes
- Fogged or failed seals in jalousie and single-pane aluminum frames: Many Coral Springs homes still carry original Westinghouse-era windows from the 1970s and 1980s. The glass fogs, the gaskets crack under year-round humidity, and the frames weep water every time an afternoon thunderstorm rolls through.
- HOA work-stop notices over frame color: You can pass the Broward building inspection with an HVHZ-certified unit and still get stopped by the HOA because the frame color wasn’t pre-approved. Coral Springs subdivisions with architectural review boards often require bronze or white anodized aluminum to preserve the original streetscape. We run that approval step before we order anything.
- Water intrusion from improperly bedded impact windows: Homes here sit on aging stucco facades, and a window set without proper flashing tape and sealant bedding will leak within one season of Coral Springs’s June-October rains. We’ve seen it happen with units that carried perfectly valid NOA paperwork but were installed by crews that didn’t understand concrete-block openings.
- Builder-grade windows from the 1990s hitting end-of-life all at once: Coral Springs’s 1990s subdivisions were built fast, and the windows were often the first thing trimmed. A whole street of similar CBS homes will start showing the same failing seals and warped sashes within a few years of each other, and homeowners end up replacing six windows when they planned on two.
Pricing for Window Replacement in Coral Springs, FL
You’ll find a real range here because the work varies. A basic insert window replacement in Coral Springs runs $650-$1,450 per opening, while full frame replacement starts around $1,200 and goes up to $2,800 or more depending on window size, product line, and how much stucco repair the opening needs. Impact-rated windows meeting Broward County’s HVHZ requirements add $300-$900 per opening over non-impact glass, and that’s not a markup, it’s the cost of the NOA-certified product and heavier frame engineering. Labor in Coral Springs runs slightly above unincorporated Broward because of the extra inspection and HOA documentation steps that city projects routinely require.
What affects your price most: the condition of the existing frame, the window’s size, whether the HOA requires a specific frame color or material, and whether we’re doing a straight insert or a full tear-out. We write line-item quotes before we start, and the price on the quote is the price on the bill. Call (850) 303-7739 for a free estimate, and we’ll give you side-by-side numbers on two or three product lines so you know exactly what you’re buying.
We Also Serve Cities Near Coral Springs
TruePane runs crews into Margate, Coconut Creek, Pompano Beach, and Fort Lauderdale from our South Florida dispatch, so if you’re one neighborhood over from us in Coral Springs, the same people who measure, permit, and install your windows are the ones you’ll see on the job. If you’re outside this page’s target area but need Window Replacement work done in Broward County, give us a call and we’ll point you to the right page or schedule a visit. And if you’re here in Coral Springs, we’ll have a technician at your door when we say, with the right window on the truck.
Serving Coral Springs, FL - Our Local Coverage Area
We’re based in the Coral Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Coral Springs
Yes, in most Coral Springs subdivisions with an architectural review board, you’ll need HOA approval for window replacement even after the city of Coral Springs issues the building permit. The city inspection and the HOA approval are entirely separate. Broward County’s building department cares that your product carries the proper NOA certification and meets HVHZ code. Your HOA often cares about frame color, grid pattern, and whether the new window matches the original 1970s or 1980s streetscape aesthetic. We’ve seen work-stop notices issued over a white frame when bronze anodized was specified. Before we order a single window, we check the HOA requirements for your subdivision and factor that approval step into the timeline. Call (850) 303-7739 and we’ll walk you through which approval applies first.
No. Coral Springs sits inside Broward County’s High Velocity Hurricane Zone, which means every window and door replacement must carry Miami-Dade or Broward Notice of Acceptance approval regardless of how far inland the house is. The idea that inland homes can use cheaper non-HVHZ products is one of the most expensive misunderstandings in this city’s window market. Homes across the county line in unincorporated Palm Beach can legally install standard impact products, but that loophole does not exist in Coral Springs. If you buy a non-HVHZ unit online and install it, you’ll fail the Coral Springs building inspection and pay for tear-out and replacement. We quote HVHZ-certified products only, and we’ll show you the NOA documentation before anything goes on the truck.
Fogged jalousie windows in a Coral Springs Florida room mean the seals have failed and the panes are drawing in humid air, which is the standard end-of-life condition for the original aluminum louvered units installed throughout the city’s 1970s and 1980s subdivisions. These windows were never designed for HVHZ compliance and carry single-pane glass with no meaningful wind-borne debris protection. Replacement means taking out the entire jalousie frame and setting a proper HVHZ-certified unit into the concrete block opening. In one Coral Springs project in The Hills subdivision, we replaced a 1982 jalousie Florida room with fusion-welded Simonton casement windows carrying Broward NOA approval, installed argon-filled low-E insulated glass, flashing-taped the new jambs, and passed both city inspection and the HOA’s bronze anodized frame color review. Call (850) 303-7739 for a quote on swapping that room over.
For most 1990s Coral Springs homes, the builder warranty on windows has long expired, so replacement won’t void anything the builder still covers. Builders in that era typically offered one-year workmanship coverage and two-to-five-year window warranties, and those are gone by the time the windows are failing. The real question isn’t the builder warranty, it’s the HOA rules and the manufacturer warranty on your replacement. We register both warranty layers in writing before the truck leaves your driveway, and we back the workmanship with the Done Right Promise. If a failed window was replaced by a previous owner or a contractor you can’t reach, we’ll inspect the installation and tell you honestly whether it can be repaired or needs full replacement.
There are no Coral Springs-specific window rebates as of 2026, but Florida Power & Light runs periodic efficiency incentive programs that apply to Coral Springs customers upgrading to ENERGY STAR-rated windows, and federal tax credits for qualified energy-efficient improvements were still available through the Inflation Reduction Act’s residential energy credit. The rebate landscape changes, so we don’t quote tax advice. What we can quote is the window price and the U-factor, which is what any rebate program is going to ask for. A modern argon-filled low-E unit at 0.26-0.30 U-factor is the number you’ll need. Call (850) 303-7739 and we’ll help you figure out which products meet the current program requirements.
If you’re ready to talk windows in Coral Springs, call (850) 303-7739. We’ll set a time, measure every opening twice, and hand you a written line-item quote before you commit to anything. Free estimates, no pressure, and the work done right the first time.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Coral Springs and surrounding Broward County communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.