Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Casement Windows in Lauderhill, FL | TruePane Windows & Doors
Casement windows are side-hinged units that crank outward, and in South Florida they’re one of the most practical choices you can make. Why? Because the sash presses into a full compression seal when closed, creating an airtight lock against wind-driven rain and humid air. That seal matters in Lauderhill, where afternoon thunderstorms and hurricane season are just part of life. TruePane Windows & Doors installs impact-rated casements across Broward County, and we’ve been doing it long enough to know that a window is only as good as the installation behind it. If you’re researching casement windows for a Lauderhill home, call (850) 303-7739 and we’ll walk you through your options.
Product Overview - Casement Windows
Casement windows open outward on side hinges, operated by a crank handle. They’re the only window style that opens the full sash away from the frame, which means you get 100 percent of the opening for ventilation. That’s a real advantage in Lauderhill, where cross-breezes make a difference in how often your AC runs. Close the window and the sash compresses against the frame on all four sides. That compression seal is what gives casements their air and water performance, and it’s the same mechanism that helps an impact-rated casement hold up during a storm.
We install casements in both aluminum and vinyl frames. Aluminum gives you thinner sightlines and more glass area, which works well on modern Florida homes and mid-century builds. Vinyl offers thermal performance and a lower maintenance profile, preferred by many Lauderhill homeowners who don’t want to think about repainting. Both materials are engineered to meet High-Velocity Hurricane Zone requirements when paired with impact glass and the proper hardware. The crank mechanism and multi-point locking system are what make this window profile stand out. When you close an impact casement, it doesn’t just latch at one point. It locks at multiple points along the frame, pulling the sash tight against the seal. That’s the engineering that keeps wind-driven water out and helps the window resist forced entry.
Architecturally, casements suit ranch homes, waterfront properties, and contemporary designs in Lauderhill. They work well over kitchen sinks, in bathrooms, and anywhere you’d otherwise reach across a counter to open a sliding window. Crank operation means less reaching and less strain on the frame. And for homeowners who want unobstructed outward ventilation without a center mullion, casements give you that clean open view when the sash is cranked out.
TruePane Windows & Doors installs casement windows across our product lines, including PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass. We stock and order configurations that match the wind zone your Lauderhill property sits in. Call (850) 303-7739 to talk through which line fits your project.
Technical Specifications
Here’s what we offer on our impact casement windows in Lauderhill, in plain terms. These specs apply across the product lines we install. Every configuration gets verified against Florida Product Approval documentation before we order.
- Frame materials: Aluminum or vinyl, depending on your home’s architecture and your maintenance preferences
- Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, and clear glass
- Finish colors: White, almond, bronze, black, and tan
- Screen options: Fixed screen or retractable screen
- Operation: Side-hinged, crank-operated with multi-point locking hardware
- Design pressure: Matched to your wind zone, up to +/-100. Never higher than what your zone requires
- Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration, engineered to FBC HVHZ requirements
Sizes vary by product line and configuration. We don’t quote a “standard size” range because casements can be built to match existing rough openings in many cases, which matters for retrofit work in older Lauderhill neighborhoods. Your exact size and design pressure get confirmed during the free on-site measurement. Call (850) 303-7739 to schedule yours.
Hurricane & Compliance Performance
Laminated Impact Glass - The glass in our impact casements uses a PVB (polyvinyl butyral) interlayer sandwiched between two panes. If something hits the window during a storm, the glass cracks but the interlayer holds the broken pieces in the frame. It’s the same principle as a car windshield. The glass stays in place, which keeps wind and water out of your Lauderhill home and prevents debris from becoming a projectile inside your living room.
Miami-Dade NOA and Florida Product Approval - Every casement configuration we sell carries a Miami-Dade Notice of Acceptance or Florida Product Approval number when required. These approvals are issued per specific configuration, meaning the exact frame, glass, and hardware combination has been tested and documented. We verify the approval number against your quote before we order, so your permit package is correct.
FBC / HVHZ Compliance - Our casement windows are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ applies to Broward County and Miami-Dade County, and it’s stricter than the wind-load standards used in most of the country. If your Lauderhill home is in an HVHZ jurisdiction, your windows have to meet this standard. Ours do.
TAS 201 / 202 / 203 Testing Context - These are the test protocols HVHZ-rated products are evaluated under. TAS 201 covers large-missile impact, which simulates a 2×4 striking the window. TAS 202 covers cyclic wind-pressure loading, which simulates sustained hurricane-force winds pushing and pulling on the glass. TAS 203 covers forced-entry resistance. Products rated under this protocol family are tested to survive the storm, not just the brochure.
Design Pressure for Your Wind Zone - We size every casement to the design pressure your specific Lauderhill property requires. Ratings are matched to your wind zone, up to +/-100. We never sell a higher rating than you need, because that just adds cost without adding protection. If your opening calls for a DP 60, you get a DP 60. If it calls for a DP 80, that’s what we quote. Exact figures come from your permit drawings and site measurement.
Energy Performance - Laminated impact glass does the storm work, but we also offer Low-E insulated glass and tinted glass options for energy performance. Low-E coatings reflect heat back outside, which helps keep your Lauderhill home cooler in July and August. Tinted glass reduces glare without losing the view. These options work alongside the impact interlayer, not instead of it. Your quote can include both impact protection and thermal performance.
Color & Glass Options
Lauderhill homes run the style spectrum, from classic ranches to newer Mediterranean-inspired builds. Our casement windows come in five finishes: white, almond, bronze, black, and tan. White and almond fit the clean, coastal look you see across much of Broward County. Bronze and black work on contemporary homes and on darker trim palettes, and they hide storm grime better than lighter colors. Tan complements stucco exterior walls, which dominate a lot of Lauderhill’s residential architecture.
On the glass side, you’ve got four choices. Clear laminated impact glass gives you the most natural light while still meeting HVHZ requirements. Tinted laminated glass cuts glare, which matters on western-facing walls in Lauderhill that catch afternoon sun. Low-E insulated glass adds a thermal barrier, pairing impact protection with heat rejection. And for maximum thermal performance, you can combine Low-E coatings with insulated glass units. We’ll walk you through what’s available on each product line, because not every glass type is offered on every frame material. Your free measurement is the time to ask about samples and see finishes against your stucco and trim. Call (850) 303-7739 to book it.
Installation by TruePane Windows & Doors in Lauderhill
An impact-rated casement window only performs as tested if it’s installed correctly. The NOA approval applies to the product as a system, but a bad installation can compromise that system. We see this all the time in Lauderhill, where older homes have settled frames, out-of-square openings, and rot hidden behind drywall. A window jammed into a bad opening and caulked over is not a hurricane window. It’s a problem waiting for the next storm.
Our installation process starts with a pre-install inspection. We check the rough opening for square, level, and plumb. We look for moisture damage and rot. If the opening isn’t right, we fix it before the window goes in. Then we set the frame level, plumb, and square, shimming as needed. We apply AAMA 812 low-expansion foam around the perimeter for air and water sealing, following AAMA 2400/2410 installation practice. The foam seal works with the window’s compression seal to keep wind-driven rain out.
After the window is secured, we run a water test on the installation and inspect the interior for any sign of intrusion. Then we install the sash, test the crank operation, adjust the multi-point locking hardware, and verify the seal closes evenly. We finish with exterior trim work and a full cleanup. Your old windows and all job debris leave with us.
Permitting matters in Lauderhill. We know what Broward County and the City of Lauderhill require for window replacement permits, including the NOA or Florida Product Approval documentation that has to accompany the permit application in HVHZ zones. We don’t pull permits on every project, but we provide the product documentation your contractor or expeditor needs, and we flag any issues before they become permit delays. Coastal exposure, wind zone, and local code amendments all factor into what gets approved. We’ve been installing windows in this market long enough to anticipate those issues.
Frequently Asked Questions - Casement Windows
Design pressure is matched to your specific wind zone, up to +/-100. The exact DP rating for your home depends on your location in Lauderhill, the height of the opening, and the size of the window. We calculate the required rating from your permit drawings or during our site measurement, and we order to that figure. We don’t oversell a higher rating than your zone demands. Call (850) 303-7739 and we’ll confirm what your openings need.
Lead time depends on the product line and configuration you choose. Most impact casement orders run several weeks for fabrication, and custom sizes or specific color combinations can extend that. We’ll give you a firm timeline on your quote before you commit. If you’re replacing windows before selling a home or before hurricane season, book your measurement early. Call (850) 303-7739 to get a current lead-time estimate for the line you’re considering.
In most Lauderhill window replacement permits, yes. HVHZ jurisdictions require documentation showing the window has a valid NOA or Florida Product Approval number for the exact configuration being installed. We provide that documentation with your quote, and we verify the approval number matches the frame, glass, and hardware you actually order. If your contractor or expeditor handles the permit, we’ll supply what they need. If you’re pulling the permit yourself, we’ll point you to the right paperwork.
Yes, within the limitations of each product line. Casement windows can be ordered in custom widths and heights to match existing rough openings, which matters a lot in older Lauderhill homes where opening sizes are irregular. You can also specify finish color, glass type, and screen style per window. Some configurations, like oversized sashes or specific hardware options, may not be available on every line. We’ll show you what’s possible on PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass during your free measurement. Call (850) 303-7739 to schedule it.
Casement frames need minimal maintenance. Wash the frames with mild soap and water a few times a year. Keep the track and hinges clean of sand and salt buildup, which is common in Lauderhill. Lubricate the crank mechanism and locking points with a dry silicone spray once a year. Check the compression seal for tears or flattening before hurricane season, and keep weep holes clear so water drains out. If the crank feels stiff or the sash doesn’t seat evenly, call us before you force it. A window that doesn’t close tight isn’t protecting your home.
Get a Quote - Casement Windows in Lauderhill
We install impact casement windows across Lauderhill, from single-window replacements to whole-home projects. The quote starts with a free on-site measurement, where we check your openings, confirm your wind zone, and walk you through frame, glass, and finish options on every product line we carry. No pressure, no vague pricing. Call (850) 303-7739 to schedule your free measurement and get a written line-item quote.
Written by the team at TruePane Windows & Doors, serving Lauderhill and Broward County with hurricane-impact window and door installation.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images



Before
After
Before
After
Before
After