Mr-Glass Windows & Doors in Sunrise, FL

Mr-Glass Windows & Doors in Sunrise, FL | TruePane Windows & Doors

TruePane Windows & Doors provides independent Mr-Glass service across Sunrise, FL. We are not a manufacturer call center. We are the local crew Sunrise homeowners call when a 1970s Mr-Glass aluminum frame has finally given out under this city’s specific blend of ground moisture, settling fill, and HOA rules. Call (850) 303-7739 for a free estimate.

Call (850) 303-7739

What makes us different in Sunrise is simple: Dale Kessler, our owner, grew up off Oakland Park Boulevard in Lauderhill and learned to reglaze windows from his father before he could drive. We know exactly how Mr-Glass frames behave on Sunrise’s former Everglades soil, because we have torn out hundreds of them. If you need honest Mr-Glass repair or full-frame impact replacement, we are the call that ends the search.

Why Sunrise Residents Choose Us for Mr-Glass Service

Most window companies treat a Mr-Glass service call as a quick parts swap. We treat it as a diagnosis. That distinction matters in Sunrise, where the original Mr-Glass windows and doors were built for a soil condition that no longer matches what is under them now.

Dale Kessler sharpened his technical training at Broward College’s construction trades program in the early 1990s, then spent nearly three decades measuring, setting, and sealing windows and doors across Broward County. His specialty is impact-rated installations that hold their specs years after the permit card comes down. That background shapes how we approach every Mr-Glass repair here. We measure the rough opening, check the frame for rack, look at the weep holes, then tell you straight whether this is a parts fix or a full-frame replacement. No guesswork, no upselling. We are an independent Mr-Glass service provider, which means our only loyalty is to the homeowner standing in the room.

When the job is done, it is covered by our Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing before the truck leaves the driveway. That is not a marketing line. That is Dale’s rule, and it is been the rule since 2008.

Common Mr-Glass Windows & Doors Problems We Solve in Sunrise

These are the specific failure modes we see on Mr-Glass products in Sunrise, not generic complaints from a national call script:

• Corrosion blooms at the weep holes on Series 2000 horizontal rollers. Sunrise sits on drained Everglades land, and the groundwater table is high. Sprinkler overspray adds to it. The bottom track on a Series 2000 roller traps moisture and salt from the air, and the aluminum pits through at the weep holes. We see this constantly in the 1960s CBS homes across Sunrise.
• Series 800 single-hung aluminum frames bow outward at the meeting rail. The original thin-wall aluminum on single-pane Series 800 windows flexes under Florida sun and wind. Once the meeting rail bows, the crank-out hardware snaps, and the sash no longer seats tight against wind-driven rain. In Sunrise, that means water inside the wall cavity during a summer storm.
• 3-Lite Sliding Patio Doors seize on worn nylon rollers. The original 1970s villas in Sunrise were built close to drainage canals. Over decades, sand and muck work into the track. The original nylon rollers grind down to nothing, the door seizes, and the interlock wears thin enough to admit air. We pulled one of these from Sunrise Golf Village last April and the rollers had disintegrated into orange grit.
• Casement window operators strip their gear teeth. When the fill beneath a Sunrise home settles, the rough opening shifts. The casement frame racks out of square, the operator gears bind, and the crank strips. The sash ends up flapping or stuck open. A new operator alone will not fix it; the frame has to be squared first.
• Fogged seals on original single-pane assemblies. The original Mr-Glass units predate modern insulated glass standards. After forty or fifty years in Sunrise humidity, the seals fail and condensation builds between panes. If the frame is still square, we can replace the glass pack. If the frame is pitted through, replacement is the honest answer.

Mr-Glass Service in Sunrise: What Local Conditions Mean for Your Equipment

Here is a fact about Sunrise that you will not hear from a manufacturer rep: Sunrise was built out almost entirely between the 1960s and 1980s on drained Everglades wetland. The organically rich, high-moisture soil still shifts and settles. That means out-of-square rough openings are endemic across this city. And out-of-square openings are why full frame-and-sash tear-outs are the norm in Sunrise, not quick insert replacements.

What does that mean for a Mr-Glass owner? Your Series 800 single-hung or Series 2000 roller was installed into a rough opening that has likely moved a quarter-inch or more since the day it was set. The frame may look fine from the street, but it is carrying stress you cannot see. When we come out for a Mr-Glass service call in Sunrise, the first thing we check is not the hardware. It is the relationship between the frame and the opening. If the sash is racked or the frame is pitted through, we say so plainly. On Sunrise’s settling soil, a patch job on a racked frame will fail again inside a year. We spec a full-frame impact replacement instead, squared with composite shims, so it stays true.

Mr-Glass Models & Products We Service in Sunrise

We service the original Mr-Glass model lines still found throughout Sunrise:

• Mr-Glass Series 800 single-hung aluminum
• Mr-Glass Series 2000 horizontal roller
• Mr-Glass 3-Lite Sliding Patio Door
• Mr-Glass Casement/Project-Out Window

Our parts policy is straightforward. We always try OEM Mr-Glass balances, rollers, locking hardware, and latches first. When a series is out of production, we machine aftermarket stainless or reinforced nylon parts that outlast the original. We stock common Mr-Glass parts locally so a Sunrise service call does not wait on a warehouse in another state. For full-frame replacements, we are an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI. You get side-by-side quotes on paper, so you see exactly what you are buying before any work begins.

Mr-Glass Service Pricing in Sunrise

FAQs - Mr-Glass Windows & Doors in Sunrise

Service Areas Near Sunrise

If your home is outside Sunrise proper, we also serve Mr-Glass service in Lauderhill, Mr-Glass service in Lauderdale Lakes, Tamarac, North Lauderdale, and Oakland Park. If you are near Sunrise but not sure whether we cover your street, call (850) 303-7739 and ask. A live person answers, 24 hours a day, 7 days a week.

Book Your Mr-Glass Service in Sunrise Today

Call (850) 303-7739 to schedule your free Mr-Glass estimate in Sunrise. We will measure, diagnose, and give you a written quote before any work begins. Serving Sunrise service area with a Done Right Promise on every job. For more on our Mr-Glass depth, see Mr-Glass sales & service.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Sunrise since 2008.