CWS Custom & Geometric Windows Nationwide | TruePane Windows & Doors

CWS Custom & Geometric Windows in Lauderhill: What to Know First

If you have CWS custom or geometric windows in your Lauderhill home, you already know they’re not off-the-shelf units. We provide independent CWS service, repair, and replacement for arched, radius, trapezoid, and oversized custom units across Broward County. A typical CWS diagnostic visit costs between $95 and $185, and most custom window repairs run $225 to $700 depending on glass, frame work, and hardware. As an independent CWS service provider, we are not affiliated with or authorized by CWS, but our techs work on these units every week and know where they fail.

Call (850) 303-7739

This page is for homeowners in Lauderhill and neighboring communities who own CWS windows and need a straight answer about repair, replacement, or warranty options. Call (850) 303-7739 and a live person answers, day or night.

Key Takeaways

• CWS custom and geometric windows often fail at seal points and radius stress areas unique to shaped glass.
• Most CWS units in Lauderhill homes are 15 to 25 years old and out of their original warranty window.
• We quote manufacturer-side service with line-item pricing, no surprises on the bill.
• Every CWS job is covered by our Done Right Promise and The Keystone Standard.
• Call (850) 303-7739 for a free estimate and a straight answer.

How CWS Products Fail - and How We Fix Them

CWS built a reputation for residential aluminum and vinyl windows across South Florida, and a lot of Lauderhill homes still have original CWS units from the 1990s and early 2000s. Shaped glass and custom geometry age a little differently than standard rectangles. Here’s what we see on CWS jobs in this area, series by series where it applies.

• Fogged or condensation-soaked glass in radius and arch units. CWS curved and eyebrow windows carry their thermal seal right into the bend, and that’s where it fails first on older insulated glass. On CWS 2000 and CWS 3000 series fixed arches, the butyl flexes over years of Broward heat and humidity, pulls away from the spacer, and lets moisture in. A fogged CWS arch is not a wipe-down problem. The insulating glass unit has to be rebuilt or replaced, and ours are cut and sealed to the original radius, not shimmed with a close-enough blank. Cost runs $175 to $450 per unit depending on glass pack and coating.
• Binding sashes on large trapezoid and oversized horizontal units. Custom CWS configurations with unusual angles put more torque on the sash frame than the manufacturer’s standard corner keys were built to take. We see this on CWS 5000 series picture windows and on CWS horizontal sliders wider than 72 inches. The frame settles, geometry drifts, and mid-day heat causes expansion that makes the sash stick. Our fix starts with measuring the diagonal and re-truing the frame rather than forcing shims or planing the vinyl, which only moves the problem to the next wet season. Re-truing and roller replacement commonly runs $180 to $320.
• Weeping cracks at the radius corners of geometric fixed windows. This is a CWS-specific point worth knowing: certain CWS radius corner extrusions from the mid-1990s were factory-tensioned in a way that hairline cracks can develop at the outside bend after 20-plus years of expansion cycles. You’ll see a fine arc crack near the corner and water streaking on the interior sill after a heavy rain. The field repair is a structural adhesive fill and re-seal, not a caulk smear over the top. We do the fill from the glass side, then re-bed the unit. This repair runs $150 to $275 per corner and is not covered if the original CWS warranty term has expired.
• Hardware wear on CWS multi-point locking systems. Older CWS casement and awning windows used a multi-point tie-bar lock that CWS has since discontinued for most replacement parts. When the bar strips or the keeper seats wear, the window will not lock flush and you lose the weather seal at the strike side. We carry a stock of aftermarket tie-bar sets that match the original CWS footprint, and where that is not the right call, we replace the full lock mechanism and dress the keeper plates to factory contact. Hardware replacement with adjustment runs $95 to $185.
• Failed glazing stops and loose glass in shaped CWS sashes. On geometric and shaped units, CWS uses flexible glazing vinyl to hold the glass into a non-square sash. This strip hardens in South Florida UV and loses grip. You’ll hear the glass rattle in the frame when the wind hits the house or when the garage door closes. Our fix is a re-glaze with new vinyl sized to the unit’s actual channel depth, not a generic press-fit bead. Re-glazing a standard CWS custom sash runs $80 to $150 per sash including material.

Our CWS Custom & Geometric Windows Process

We treat every CWS job like the homeowner is standing right behind us, because almost always they are. Here’s how a CWS repair or replacement goes from first call to final walk-through.

1. 1
   Call and talk to a person. You call (850) 303-7739, a live person answers, and we ask the right questions: window age, shape, what you’re seeing, and whether water has entered the house. We do not route you to a call center.
2. 2
   In-home diagnosis and measurement. Our tech shows up on time, uniformed and background-checked. We measure every opening twice and inspect the existing CWS frame, glass, hardware, and seal condition before recommending anything.
3. 3
   Parts decision on paper. If the job calls for replacement glass or hardware, we lay out OEM versus quality aftermarket options side by side, with prices, so you see exactly what you’re buying and why. If the spec sheet doesn’t back it up, we don’t say it.
4. 4
   Repair or replacement. Most CWS custom and geometric window repairs are completed in a single visit. For full replacements of oversized or arched units, we schedule the build, bring the replacement cut and ready, and set it square the day it arrives.
5. 5
   Test, clean up, and register warranties. We cycle the unit, check the seal, clean the glass and frame, haul off the old material, and register both manufacturer warranty layers in writing before the truck leaves your driveway.
6. 6
   Done Right Promise. If anything is not done right, we make it right. No paperwork fights, no arguing. That’s The Keystone Standard, and it is our baseline, not an upgrade.

What CWS Custom & Geometric Windows Costs in Lauderhill

CWS custom and geometric window pricing in Lauderhill depends mostly on glass size, shape complexity, and whether the frame is sound enough to rebuild in place. Here is a straightforward breakdown of the numbers we quote on a typical day.

• Diagnostic visit: $95 to $185, credited toward repair if you move forward.
• Small hardware repair or re-glaze, single sash: $95 to $185.
• Full glass replacement for a standard CWS custom fixed window: $225 to $425 including new insulated glass and seal.
• Arch, eyebrow, or radius glass replacement: $350 to $700 depending on radius and coating.
• Full replacement of a CWS window with a new custom or geometric unit: $800 to $2,200 per opening, depending on size, glass package, impact rating, and frame condition.
• Complete multi-window CWS retrofit in an average Lauderhill home: $4,000 to $14,000, depending on count and geometry.

What moves the price in a meaningful way is whether the existing CWS frame is true and structurally solid. A sagging oversized opening that has to be re-framed can add $300 to $800 per window. A rotted or termite-touched buck is its own separate conversation. We write line-item quotes on paper, and the number we quote is the number you pay. Call (850) 303-7739 for a free estimate on your specific CWS units.

Why Lauderhill Homeowners Call TruePane Windows & Doors for CWS Work

We are not the cheapest bid you will get on a CWS window job in Lauderhill, and we are fine with that. The homeowners who call us are the ones who have already called the cheapest bid once and spent the next three years looking at a window that is not square and a phone number that does not ring back.

TruePane Windows & Doors has been serving local communities since 2008. Dale Kessler founded the company in 2008 on a simple rule he learned from his father, reglazing windows for neighbors off Oakland Park Boulevard: if the pane is not true, the job is not done. We are not a franchise playbook and we are not a regional operation learning Lauderhill on a map. Our techs know CWS, but they also work on PGT, CGI, ES Windows, and ECO Window Systems every week, which means a CWS diagnosis comes with real knowledge of what other South Florida brands do differently, not just a one-brand pitch.

A live person answers every call, 24 hours a day, 7 days a week. Every job is covered by the Done Right Promise. Both manufacturer warranty layers get registered in writing before our truck leaves the driveway. We show up on time, in uniform, and we leave your house the way we would leave our own mother’s.

FAQs