Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Custom & Geometric Windows in Lauderhill: What to Know First
CGI custom and geometric windows in Lauderhill typically run between $1,800 and $6,400 per opening installed, depending on size, shape complexity, and whether the unit is impact-rated. Most custom CGI orders take six to nine weeks from factory release to our truck, and we complete the install in a single visit. We are an independent CGI service provider, not affiliated with the manufacturer, which means we quote OEM and proven aftermarket options side by side on paper so you see exactly what you’re paying for.
If you own a Lauderhill home with arched, radius, triangular, or oversized CGI openings and the seal has failed, the frame has sagged, or the glass is cracked, call (850) 303-7739 for a free estimate. This page covers what we see on CGI geometry work across Lauderhill, what it costs, and how we keep the warranty intact while we fix it.
How CGI Products Fail - and How We Fix Them
- Seal failure on radius and arched units. The CGI Estate and Targa series use bent-glass corners on arched tops. In Lauderhill’s wet season, repeated thermal cycling makes the spacer at the bend the first thing to let go. You’ll see fog between the panes that starts at the crown of the arch and creeps downward. We deglaze the sash, replace the insulated glass unit with a spec-matched curved IGU, and reseal with the same structural silicone the factory calls for.
- Sash sag on oversized geometric openings. Picture windows shaped as trapezoids or wide arches put load on the frame corners in ways a standard rectangle doesn’t. We regularly see CGI Targa picture units with a quarter-inch sag at the hinge-side corner after ten-plus years. The fix is pulling the sash, checking the corner keys and screws, and resetting the frame with new shims before rehanging. If the corner key is cracked, we replace it rather than patch it.
- Roller wear on CGI Estate sliding geometry. Custom polygon sliders look great but the bottom rollers take uneven weight. When a Lauderhill homeowner tells us the panel grinds or binds on one end, it’s almost always a flat-spotted roller. We replace rollers in pairs with OEM-gauge stainless hardware and adjust the track so the panel rides true. A $40 roller left alone becomes a $600 track replacement.
- Frame corrosion near Lauderhill sprinkler lines. This one is specific to our local climate and irrigation habits. Aluminum CGI frames that catch daily reclaimed-water spray develop pitting along the bottom rail faster than anything we see from weather alone. We catch it early, clean the oxidation, and recommend a simple sprinkler head adjustment. Left alone, the pitting eats into the weep system and you get water inside the track.
- Impact glass delamination on older CGI units. Early-2000s CGI impact windows used a PVB interlayer that can begin clouding at the laminate edge after 15 to 20 years of South Florida sun. It looks like fog but it is not a seal failure, and replacing the glass is the only honest fix. We verify delamination with a close edge inspection before quoting, so you’re not paying for a new IGU when the real problem is the laminate itself.
Our CGI Custom & Geometric Windows Process
Every CGI geometry job in Lauderhill follows the same sequence, and we don’t skip a step to save a trip.
- 1
The call. A live person answers at (850) 303-7739. We ask about the window shape, what you’re seeing, and when it started. No forms, no callback list.
- 2
The site visit. A uniformed, background-checked technician measures every opening twice. For geometric units, we template the actual rough opening, not just the glass, because a frame that’s out of square by an eighth of an inch changes how the new unit seats.
- 3
The parts decision. We quote OEM CGI replacement components and, where it makes sense, proven aftermarket equivalents from manufacturers we’ve worked with for years. You see both prices on paper before any work is approved.
- 4
The repair or replacement. We set the unit, square the frame, shim precisely, and seal with materials rated for South Florida exposure. On impact-rated openings, we verify the anchoring matches the original tested assembly.
- 5
The warranty registration. This is The Keystone Standard, and it applies to every CGI job we touch. Both manufacturer warranty layers get registered in writing before our truck leaves your driveway. Durations stated, paperwork done, no arguing later.
- 6
The cleanup and walkthrough. We haul away the old unit and packaging, show you the finished work, and leave you with the Done Right Promise in writing. If the pane is not true, the job is not done.
What CGI Custom & Geometric Windows Costs in Lauderhill
Straight numbers help, so here’s what we typically see on Lauderhill CGI work:
- IGU replacement on a CGI arched or radius window: $400-$900, depending on glass size, curvature, and whether it carries an impact rating.
- Full sash replacement on a CGI Estate geometric picture window: $900-$2,200, including glass, frame, and labor.
- Complete custom CGI window replacement for a shaped opening: $1,800-$6,400 installed, with impact-rated laminated glass and factory finish pushed to the upper end.
- Roller and track rebuild on a CGI sliding geometric panel: $180-$500, parts and labor included.
What moves the price is shape complexity, glass type, and whether we’re rebuilding an existing frame or setting a new unit into a rough opening that needs correction. Lauderhill homes built in the 1980s and 1990s often have openings that drifted out of square, and setting a geometric unit into a correct frame is always cheaper than forcing it into a bad one. Call (850) 303-7739 for a free estimate with line-item pricing. No surprises on the bill, ever.
Why Lauderhill Homeowners Call TruePane Windows & Doors for CGI Work
We’ve been serving Lauderhill and Broward County since 2008, and our founder Dale Kessler grew up off Oakland Park Boulevard, so we know the houses, the climate, and the way thirty-year-old stucco reacts when you pull a frame. Every CGI job is backed by the Done Right Promise and The Keystone Standard, both warranty layers registered in writing before we leave the driveway. A live person answers our phone 24/7, and the technician who shows up is background-checked, uniformed, and trained on CGI’s geometry lines specifically.
When a CGI unit is beyond sensible repair, we quote replacement lines side by side from PGT, CWS, ES Windows, and ECO Window Systems so you’re never cornered into one manufacturer. We do the work the way we’d do it for our own mothers, and we’ll be there when we say.
FAQs
Yes, in most cases. As an independent CGI service provider, we follow the manufacturer’s installation and sealing specs precisely, and we register both warranty layers in writing before we leave. If a repair would conflict with the original warranty terms, we tell you before touching the window, and we show you the exact language on paper.
Factory lead time on a custom CGI geometric unit is typically six to nine weeks from order release. Our on-site installation is completed the same day once the unit arrives, including cleanup and warranty registration. Call (850) 303-7739 and we’ll give you a current lead-time estimate for your specific window.
If the frame is square, the corners are intact, and only the glass or a roller has failed, repair is usually the smarter money. If the frame has sagged, the corner keys are cracked, or the unit has delaminated, replacement is the honest answer. We’ll show you the condition of everything we find, with photos, and let you make the call.
Yes. We’ve done oversized and geometric CGI work across Lauderhill for years, including wide-radius arches and polygon picture windows that need templating before the new unit is ordered. The frame gets measured twice, every time.
Call (850) 303-7739 and a live person will answer. We’ll schedule the soonest available site visit in Lauderhill and give you an honest arrival window. If it’s a safety issue, like a cracked impact unit, say so when you call and we’ll prioritize it accordingly.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Lauderhill and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.