ES Windows Window Replacement Nationwide | TruePane Windows & Doors

ES Windows Window Replacement: The Lauderhill Owner’s Guide

If you have an ES Windows product with a failed sash, fogged insulated glass unit, broken seal, or hardware that no longer locks, we stock and install ES Windows-compatible replacements in Lauderhill, with most swaps completed in one visit. Installed replacement of a standard ES Windows insulated glass unit in Lauderhill typically runs $320 to $680, depending on size, glass package, and whether the frame itself needs work. The way most owners find us is simple: a window that used to open smoothly now sticks, or a pane that used to be clear now looks like you’re staring through a shower curtain at sunrise.

Call (850) 303-7739

We are an independent service provider, not a factory affiliate of ES Windows, and that matters because we’re free to tell you when an aftermarket equivalent does the job as well as the OEM part, and when it doesn’t. Dale Kessler and the crew at TruePane have been setting glass in Broward County for decades, and we’ve replaced enough ES Windows units in Lauderhill to know the line’s quirks: the glazing bead profiles changed between some production years, and the glass spacers on older coastal spec units tend to fail a little differently than the inland ones.

Which ES Windows Models This Applies To

ES Windows builds several series that show up in Lauderhill homes, most often from their aluminum impact rated lines and the thermally broken profile systems installed during the post-Andrew hardening of Broward County housing stock. The replacement parts you need depend on which series you have, and the fastest way to identify it is to check the corner of the frame or the edge of the sash for a small etched or printed designation, usually a series code plus a date stamp. If the sticker is gone, we match by the shape of the glazing bead, the profile depth, and the glass makeup.

The OEM versus aftermarket decision matters here. ES Windows uses specific interlocking aluminum extrusions, and while some generic vinyl or thinner aluminum retrofit sashes will physically fit the rough opening, they won’t seal the way the original profile does, and the water performance changes in a way that shows up in a Lauderhill summer downpour. We stock OEM-spec glass and hardware for the common ES Windows series, and we carry quality aftermarket equivalents for seals, balances, and weatherstripping where the factory part is nothing special and the aftermarket one is actually better for South Florida humidity. We’ll quote both on paper so you can see what you’re buying. If the spec sheet doesn’t back it up, we don’t say it.

Signs Your ES Windows Window Replacement Is Failing

• Condensation between the glass panes. The desiccant in the spacer strip has absorbed all the moisture it can hold, and the argon or krypton fill has escaped. No surface cleaning fixes this; the insulated glass unit is done.
• Grey haze or mineral spotting on the interior glass face. This is the classic South Florida seal failure pattern. Salt air in Lauderhill accelerates seal degradation, and once the haze sets in, the only honest fix is a new IGU.
• Sash binds or requires two hands to raise. The balance system inside the jamb has lost tension or the roller has flattened. It wears faster on ES Windows units that face direct afternoon sun, and forcing it open makes the problem worse.
• Locking hardware that won’t engage or keeps the sash from seating flush. On many ES Windows models, the striker and keeper are die cast and will fatigue after years of use. A window that won’t lock is a security gap, but it’s also a sign the frame may have shifted slightly out of square.
• Visible oxidation or pitting on the aluminum frame corner joints. Powder coat failures happen, and once moisture works into the welded corner, the frame starts degrading from the inside. Early replacement of the sash or corner key is cheaper than replacing the entire frame later.

Replacement Cost & What’s Included

A straightforward ES Windows insulated glass unit replacement in Lauderhill, installed, runs $320 to $680 for most standard sizes. Larger fixed picture units, laminated impact glass, or low-E triple coatings push that range toward $750 to $1,200. A full sash replacement with new frame hardware runs higher, usually $500 to $900 per opening depending on the series and the glass package.

Our price includes the part, the labor, disposal of the failed unit, and a written line item quote before any work begins. No surprises on the bill, no change orders because we “discovered” something after the work started. Every replacement is covered by our Done Right Promise, and if you’re replacing with a manufacturer’s warranted glass package, we register both warranty layers in writing before the truck leaves your driveway.

DIY or Call Us?

A homeowner can safely check the window’s label, measure the visible glass opening with a tape measure, and take photos of the failure for a phone estimate. What we don’t recommend is pulling the glazing bead and handling a failed IGU yourself. A sealed unit that has lost its structural bond can crack under pressure, and a lacerated hand from a broken pane is not a trade school lesson worth learning on your own kitchen floor. Most ES Windows sashes are heavy; if the balance system lets go while you’re wrestling the sash out, the window, the frame, and your fingers are all in the line of fire.

If the part has failed, we’d rather walk it in with you over the phone first. Call (850) 303-7739, describe what the window is doing, and we’ll tell you what you’re likely dealing with before you spend a dollar. Most Lauderhill jobs we quote over the phone end up scheduled for one visit.

FAQs