Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPGT Custom Windows & Doors in Lauderhill: What to Know First
PGT custom windows and doors in Lauderhill typically run $850 to $3,400 per opening depending on size, glass package, and whether the unit is impact-rated or standard. As an independent PGT service provider, TruePane Windows & Doors handles custom shape windows, oversized panels, architectural grilles, and full custom door systems for PGT products across Lauderhill, with most single-unit work completed in one visit. We’re not affiliated with PGT, and we don’t pretend to be. What we are is a local shop that’s been setting glass in Broward County since 2008, and we quote every PGT job in writing before the work starts. If you own PGT windows or doors and something’s not right, call (850) 303-7739 and a live person picks up.
How PGT Products Fail, and How We Fix Them
- PGT WinGuard aluminum frames losing their seal at the corners. We see this most often on WinGuard single-hung and picture windows installed between 2005 and 2015 in Lauderhill. The corner keys were torqued at the factory, but years of afternoon thunderstorms and the humidity cycle cause the gasket material to compress unevenly. We disassemble the frame, replace the corner key and gasket, and re-square the unit before reinstalling.
- PGT SpectraGuard vinyl sashes binding in summer. Lauderhill’s heat expands vinyl more than most homeowners expect. A SpectraGuard double-hung that opens fine in January can bind hard by August. The usual cause is the sash being set too tight against the jamb liner during the original install, not a product defect. We adjust the balance shoe tension and shim the jamb so the sash travels clean through the full range.
- PGT Custom Shape windows with stress cracks at the narrowest point of the radius. Arched and radius-top PGT windows concentrate thermal stress where the glass is narrowest along the curve. In Lauderhill, the daily swing between air-conditioned interior and exterior heat makes this worse. We replace the insulated glass unit with the same laminated or tempered spec PGT calls for on that frame, and we check the glazing bead for the expansion gap that was almost never right from day one.
- PGT sliding glass door rollers flattening on the track. PGT’s heavier impact-rated sliders weigh more than standard doors, and the factory rollers were not always matched to the weight class. On Lauderhill homes where the slider faces west, afternoon sun beats directly on the track and cooks the lubricant out of the roller bearings. We replace rollers with the correct weight-rated set, clean and re-lube the track, and re-align the door so it glides with one hand.
- PGT impact glass showing edge clouding inside the laminate. This one fools a lot of homeowners into thinking the seal failed. It’s not the seal. On some PGT impact units, the interlayer between the two panes develops a faint haze within the first several years, especially on windows facing full sun in Lauderhill. It doesn’t compromise the impact rating, but it’s a visual annoyance. We document it, confirm it with the original order spec, and advise honestly whether replacement is warranted or whether it’s a cosmetic issue better left alone.
Our PGT Custom Windows & Doors Process
- 1
Call and talk to a person. You call (850) 303-7739, and a live person answers. We ask what PGT product you have, what it’s doing, and when it started. If we can save you a service call with a straight answer over the phone, we will.
- 2
On-site measurement and diagnosis. A background-checked, uniformed technician from TruePane arrives at the time we agreed on. We measure every opening twice. Dale Kessler grew up off Oakland Park Boulevard in Lauderhill; he learned from his father that a measure taken once is a guess. We take it twice.
- 3
Parts decision on paper. We tell you whether OEM PGT parts make sense for the job or whether a quality aftermarket equivalent will do the job without voiding the warranty. Both warranty layers get registered in writing before the truck leaves the driveway. If the spec sheet doesn’t back it up, we don’t say it.
- 4
The work, done in one visit. Most PGT custom window and door repairs are completed the same day. We set the glass, re-glaze, rebuild the sash, or replace the roller assembly, and we clean the opening before we call it done.
- 5
Testing and square check. We open and close every unit, check the reveals, and verify the glass is set true. If the pane is not true, the job is not done.
- 6
The Done Right Promise. Everything TruePane does on a PGT product is covered by our Done Right Promise. If it’s not right, we make it right. No paperwork fight, no arguing.
What PGT Custom Windows & Doors Costs in Lauderhill
Honest numbers for common PGT work in Lauderhill:
- Custom shape window glass replacement (arched, radius, triangular): $620-$1,850 per unit, depending on size and whether the glass is laminated impact or tempered.
- PGT WinGuard frame rebuild (corner key and gasket replacement, re-squaring): $410-$780 per window.
- PGT sliding door roller replacement and track service: $285-$540 per door.
- Custom PGT door system installation (full replacement): $2,200-$5,800 per opening, including frame, hardware, and finish work.
- Architectural grille or SDL installation on existing PGT glass: $75-$180 per grille pattern, depending on profile.
What moves the price is access, second-story work, and whether the unit is impact-rated. Impact glass is heavier, pricier, and takes more time to set correctly. We offer fixed written line-item pricing before any work begins, standing offers of a free written repair estimate and a permanent 5% discount for seniors and veterans. Call (850) 303-7739 for a free estimate on your specific PGT job. It costs nothing to get the number in writing.
Why Lauderhill Homeowners Call TruePane Windows & Doors for PGT Work
We’ve been serving local communities since 2008, and we plan to be here in thirty more. Our founder, Dale Kessler, grew up in Lauderhill and learned the trade from his father, who spent weekends caulking and reglazing windows for neighbors who couldn’t afford to call anyone. That’s the standard we still work to. Our technicians are background-checked and uniformed, and they work in your home the way they’d work in their own mother’s. We’re an authorized installer for more than a dozen manufacturer lines, including, and CGI. If your PGT product isn’t worth repairing, we’ll tell you and quote you a replacement in a line you can trust. Every job carries the Done Right Promise and The Keystone Standard. We stand behind it, in writing.
FAQs
Yes. We source OEM PGT parts through our supply chain for most models dating back to the mid-2000s, and for discontinued hardware we use quality aftermarket equivalents that match the original spec without voiding any remaining manufacturer warranty. Call (850) 303-7739 with your model number, and we’ll tell you what’s available before you spend a dime on a service call.
Not if it’s done correctly. We register both warranty layers in writing and we follow PGT’s documented service procedures on every job. That’s the whole point of The Keystone Standard. If a repair isn’t warranty-safe, we’ll tell you before we start, not after the claim gets denied.
Most PGT repairs are scheduled within the same week you call, and most are completed in a single visit. A live person answers our phone 24 hours a day, 7 days a week, so you’ll have a straight answer the first time you call, not a voicemail tree. Call (850) 303-7739 and we’ll give you a window that we keep.
It depends on the failure. If the frame is structurally sound and the glass or hardware is the problem, repair usually costs a third to half of replacement. If the frame itself is twisted or rotted at the corners, replacement is the honest answer. We’ll show you both numbers on paper side by side, and we’ll recommend the option we’d choose on our own house.
Yes. For any job in Lauderhill that requires a permit, TruePane pulls the permit, schedules the inspection, and stays on the job until it passes. We’ve been doing this in Broward County for decades, and we know the Lauderhill code requirements without having to look them up.
Call TruePane Windows & Doors at (850) 303-7739 to schedule your free estimate for PGT custom windows and doors in Lauderhill. A live person answers, and the quote is free.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Lauderhill and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.