Simonton Sliding & Patio Doors Nationwide | TruePane Windows & Doors

Simonton Sliding & Patio Doors: The Lauderhill Owner’s Guide

TruePane Windows & Doors stocks and installs Simonton-compatible sliding and patio door parts across Lauderhill, with most roller, handle, and lock replacements running $185-$420 installed and completed the same visit. We keep common Simonton rollers, latch sets, and weatherstripping on the truck, and we can source harder-to-find parts within a few business days. Most Lauderhill homeowners discover a failing part the same way: a door that used to glide with two fingers now takes a shoulder, or a lock that refuses to catch on the first try.

Call (850) 303-7739

Key Takeaways:

• Most Simonton sliding door repairs in Lauderhill run $185-$420 installed, parts and labor included.
• We stock common Simonton rollers, handles, and locks on the truck for same-visit replacement.
• TruePane is an independent service provider, not affiliated with Simonton. We work on their doors because they’re among the most common in Broward County.
• Every replacement is backed by our Done Right Promise, with both warranty layers registered in writing.

Which Simonton Models This Applies To

Simonton builds sliding patio doors across three main lines we see regularly in Lauderhill homes: the Reflections series (the most common in Florida track homes from the 1990s and 2000s), the ProFinish series, and the StormBreaker line for impact-rated openings. The dead giveaway on a Simonton door is the etched logo in the corner of the glass, but if that’s worn off, look for a white or tan sticker on the head jamb or along the bottom rail with a six-digit order code.

Here’s the compatibility gotcha that trips up even sharp homeowners: Simonton changed their roller housing dimensions between the 5500 and 6500 series, and the two are not interchangeable. We measure the roller body width and wheel diameter before we order anything, because guessing gets you a door that binds or a roller that drops out of the track. For OEM versus aftermarket, our honest take: Simonton OEM latches and handles are worth the extra $20-$40 because the strike plate geometry is exact. For rollers, a quality aftermarket hardened-steel unit often outlasts the OEM nylon wheel in Florida’s heat and grit. We quote both on paper and let you see the difference.

Signs Your Simonton Sliding & Patio Doors Is Failing

• The door drags or catches mid-track. This is almost always a worn roller wheel or a bent roller housing. Florida’s fine sand works into the bearing and grinds it until the wheel flats, usually within 7 to 10 years on a heavily used lanai door.
• The handle lever flops loose or fails to retract the latch. The internal spring in Simonton’s flush-mount handle is the first component to fatigue, especially on doors that face afternoon sun. The latch pawl starts hanging up, then stops catching entirely.
• The lock won’t engage without lifting the door. This means the door has settled or the rollers have worn low, throwing the strike plate out of alignment. Forcing the lock causes the latch to chew into the jamb because the alignment error is usually the real culprit.
• You feel a draft or see light under the door. Simonton’s early weatherstripping used an open-cell foam that compresses permanently in about five Florida summers. Once it flattens, air moves freely and your AC works harder than it should.
• The door makes a scraping sound when sliding. That’s metal on metal, meaning the roller wheel is gone and the housing is grinding the track. Continued use scores the aluminum, and then a simple roller swap turns into a track repair.

Replacement Cost & What’s Included

In Lauderhill, you’ll pay roughly $185-$320 for a standard roller replacement on a Simonton sliding door, and $230-$420 for a handle, latch, and lock assembly replacement. The spread depends on your series and whether you need one roller or four, and whether we need to pull the door panel (which takes two technicians for safety on large panels).

Every quote we give includes the part, the labor, haul-away of the old hardware, and a written line-item price before we begin. If the job runs into something unexpected, we stop and talk to you before we spend another dollar. You won’t see surprise charges on the bill, and the work is covered by our Done Right Promise. If the part fails because we set it wrong, we make it right. No arguing, no paperwork fight.

DIY or Call Us?

Here’s an honest split: you can safely pull the door panel if you have a second person and the panel weighs less than about 80 pounds, and you can clean the track and inspect the rollers yourself. What you should not do is remove a roller carriage from a door that is still in the frame, because the panel can drop and the tempered glass will not forgive the mistake. Sliding door panels on older Simonton units can weigh over 150 pounds, and a pinch injury from a rolling panel is quick and severe.

If you can lift the door out, we’re happy to sell you the correct rollers and talk you through the swap. But most Lauderhill homeowners we see would rather have a tech who does this weekly handle it, confirm the track alignment, and test the lock engagement before leaving. If that’s you, call (850) 303-7739 and we’ll schedule a time that works.

FAQs