Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterSimonton Impact Windows & Doors in Lauderhill: What to Know First
We repair, replace, and install Simonton impact windows and doors for Lauderhill homeowners as an independent Simonton service provider. Most Simonton repairs we handle in Lauderhill are done in a single visit, and replacement work typically runs one to two days depending on opening count. Our pricing is fixed before the truck rolls, with a written line-item quote so you know the full cost before any glass gets ordered. This page is for Simonton owners in Lauderhill and surrounding Broward County neighborhoods who want straight answers about failure modes, parts, and realistic pricing. Call (850) 303-7739 and you’ll speak to a live person, not a voicemail tree.
How Simonton Products Fail, and How We Fix Them
Simonton impact windows and doors are solid Florida workhorses, but after ten to fifteen years in Lauderhill’s heat and humidity, we see the same half-dozen problems repeat. Here’s what actually fails and what we do about it.
- Failed seal on Simonton StormBreaker Plus insulated glass units. The StormBreaker Plus line, common in Lauderhill homes built after 2005, uses a dual-pane laminate construction. When the edge seal lets go, usually on the western or southern exposure, moisture gets between the panes and you get that permanent haze. We replace the full IGU, not just reseal, because a reseal on an impact-rated unit never holds its original pressure spec. We order glass cut to the exact opening measurement, never shimmed to fit.
- Stiff or binding rollers on Simonton Reflections 5500 sliding doors. The Reflections line shows up in a lot of Lauderhill ranches and split-levels. The original rollers were nylon-wheeled and in our climate the track fills with sand and fine grit that grinds the wheel flat. The door still slides, but it fights you, and the strain transfers to the frame. We replace the rollers with stainless-steel aftermarket wheels, clean the track, and reset the door so it glides without leaning on the top rail.
- Warped interlock on Simonton Madeira casement windows. Madeira casements are good windows, but the aluminum interlock at the meeting rail can warp slightly after years of direct sun on Lauderhill’s east-facing walls. You’ll feel the crank get tight at the last quarter turn and hear wind whistle through on a blowy afternoon. We reset the sash, replace the interlock weatherstripping with a firmer durometer material, and adjust the hinge so the sash seats square against the frame.
- Fogging on Simonton DaylightMax picture windows. DaylightMax is what a lot of Lauderhill homeowners picked for fixed openings they never planned to operate. The issue is almost always a failed spacer bar, which lets humid air into the airspace. On impact units we replace the entire sash assembly, because the laminate and spacer are bonded as a system. Patching a DaylightMax never saves money, it just moves the failure date out a season.
- Stripped keeper plates on Simonton Prism French doors. Prism doors are on a lot of Lauderhill master suites and patio entries. The keeper plate screws strip out of the jamb over time because the door gets used multiple times a day and the original screws are short. We re-drill for longer stainless screws, replace the keeper with a reinforced plate, and reset the lock so the deadbolt seats fully instead of half-throwing.
Our Simonton Impact Windows & Doors Process
Here’s how a Simonton job runs when we take it on, whether it’s a single sash replacement or a full opening swap in a Lauderhill home.
- 1
Call and diagnosis. You call (850) 303-7739 and describe the symptom. If we can narrow it to a probable cause over the phone, we tell you honestly. Either way, we schedule a measurement visit.
- 2
On-site measurement. Our technician measures every opening twice: once at the rough frame, once at the finished reveal. We check for racking, check the existing flashing, and photograph everything before touching anything.
- 3
Parts decision on paper. For Simonton work, we price both OEM Simonton parts and quality aftermarket equivalents side by side on a written quote. OEM keeps the manufacturer warranty path clean. Aftermarket often gets you a better roller or a firmer weatherstripping at a lower price. We recommend based on the specific failure, not habit.
- 4
The work. We remove, set, shim, and seal the correct way: full perimeter sealant on the exterior, backer rod where the gap requires, no over-shimming to make a wrong-sized unit fit. The pane gets set true, level, and square before the first screw goes in.
- 5
Test, verify, register. We cycle the window or door a full range of motion, check the weatherstripping contact, and run a hose test on the exterior where practical. Both manufacturer warranty layers get registered in writing, with durations stated, before our truck leaves your driveway.
- 6
Cleanup and recap. We remove all packaging and debris, wipe down glass, and walk you through what we did and what to expect for the first year.
What Simonton Impact Windows & Doors Costs in Lauderhill
Prices below reflect what we’ve been quoting in Lauderhill through recent months. Every job gets a written, line-item estimate before work begins, and that number does not move once work starts unless we find rot or hidden damage, in which case we stop and show you before proceeding.
- Seal-failed IGU replacement, single Simonton StormBreaker Plus window: $340 to $610 installed, depending on glass size and accessibility.
- Roller replacement and track service on a Reflections 5500 slider: $180 to $340 per door, including stainless rollers and track cleanup.
- Full Simonton impact window replacement (standard 36″ x 60″ opening): $900 to $1,400 per window installed, depending on line and glass package.
- Simonton impact sliding glass door replacement, 6-foot opening: $2,800 to $4,200 installed, including frame and threshold work.
- Prism French door keeper and lock reset: $140 to $260, including reinforced plate and hardware.
What moves the price: opening size, whether the existing frame is square, glass package (laminated vs. insulated-laminated), and whether we’re doing one opening or five. Volume helps on labor. Call (850) 303-7739 for an exact quote on your home, the estimate is free and we’ll put the numbers on paper while we’re there.
Why Lauderhill Homeowners Call TruePane Windows & Doors for Simonton Work
Dale Kessler grew up off Oakland Park Boulevard in Lauderhill. He learned glazing from his father, who caulked and reglazed neighborhood windows on weekends for people who couldn’t afford a contractor. We’ve been working on Simonton products in Lauderhill long enough to know which failures repeat and which fixes last, because we’ve already lived through the ones that didn’t. Our technicians are background-checked and uniformed, and they register both manufacturer warranty layers in writing before leaving. If the pane is not true, the job is not done. We also service Andersen, Pella, and PGT, so if your home has mixed brands, you’re not making two calls. If the spec sheet doesn’t back it up, we don’t say it.
FAQs
No, if the repair is done correctly and with the right parts. Warranty coverage depends on the specific Simonton line and how the original install was registered. As an independent Simonton service provider, we verify warranty status on every job before ordering parts, and we register both warranty layers in writing after the work is done so there’s no paperwork gap. Call (850) 303-7739 and we’ll check your coverage before you spend anything.
Yes. Simonton has consolidated some of its older lines, but most parts for StormBreaker, Reflections, Madeira, DaylightMax, and Prism series are still available through our supply channels. When an OEM part is no longer made, we spec a quality aftermarket equivalent and tell you on the quote which route we’re taking. We don’t substitute without telling you first.
A single standard-size window replacement typically takes one to two hours on site. A full house of ten to fifteen openings usually runs one to two days, including cleanup and warranty registration. We schedule around your availability and show up at the time we give you.
If the frame is square, the glass is intact, and only one component has failed, a repair usually makes sense. If the seal is blown on multiple panes, the frame shows water damage, or the window is original to a home built before the current Florida Building Code impact requirements went into effect, replacement is often the better money. We’ll show you both numbers on paper and let you decide.
Yes. Any structural opening change, including impact window and door replacement, requires a permit in Lauderhill, and we pull the permit ourselves, coordinate the inspection, and make sure the job passes before we consider it closed. The permit fee is included in the quote as a line item, not a surprise at the end.
If you own Simonton windows or doors and they don’t close right, seal right, or slide right, call TruePane Windows & Doors at (850) 303-7739. We’ll come out, diagnose the problem, and give you a written estimate. No pressure, no fine print, no change orders.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Lauderhill and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.