Simonton Window Replacement Nationwide | TruePane Windows & Doors

Simonton Window Replacement: The Lauderhill Owner’s Guide

If you own a Simonton window in Lauderhill and a sash, balance, or sealed glass unit has failed, we stock the replacement parts and can usually have the job done in a single visit. Installed pricing for Simonton window replacement work in Lauderhill typically runs $145 to $380 for hardware and balance repairs, and $235 to $610 per sash for a new insulated glass unit, depending on size and whether it’s single-hung, double-hung, or a slider. The call usually starts the same way: a window that won’t stay up, a sash that’s suddenly hard to lift, or glass that’s fogged between the panes. You’ve lived with the window for fifteen or twenty years, so you notice when it stops behaving. That’s the moment to address it, because South Florida humidity does not wait, and a failed seal only gets worse.

Call (850) 303-7739

Key Takeaways

• We stock Simonton-compatible balances, pivot bars, tilt latches, and weather seals on the truck for most Lauderhill service calls.
• Installed replacement pricing is straightforward: the part, the labor, the written warranty, no surprise line items.
• If your Simonton window is over 12 years old and showing its age, a full sash replacement often costs less over time than repeated hardware fixes.
• TruePane is an independent installer and service provider. We are not affiliated with Simonton, but we work on their product lines every week in Broward County.

Which Simonton Models This Applies To

Simonton has built a lot of product lines over the years, and the replacement part you need depends on which series is in your home. In Lauderhill, the most common Simonton lines we service are the Reflections 5500, the Profinish Brickmold 6000, and the Madeira 5500 series, along with the earlier ProFinish and StormBreaker Plus models that went into a lot of Broward County homes in the 1990s and early 2000s. Here’s what matters: Simonton changed balance designs across series lines over the years, so a balance that fits a 5500 will not necessarily seat correctly in a StormBreaker Plus frame, even if the visible measurements match. The quickest way to identify what you have is to tilt the sash in and look for the etched label in the lower corner of the frame, or find the manufacturing sticker on the head jamb. If the label has faded out, which happens after 15 or 20 years of sun exposure, we can identify the series by the balance shoe profile and the sash extrusion shape.

On the OEM versus aftermarket question: for Simonton balances and pivot hardware, we stock both. There are quality aftermarket coil balances and pivot bars that perform as well as factory parts, and we will tell you which is which before we quote. For glass units, we order through Simonton-certified fabrication channels so the spacer, the Low-E coating, and the argon fill match the original unit as closely as possible. A mismatched glass unit in a Florida room will annoy you every afternoon when the sun hits it differently than the sash next to it, and that’s the kind of detail we would rather get right the first time.

Signs Your Simonton Window Replacement Is Failing

• The sash drops or slams shut when you lift it. The coil balance or block-and-tackle balance has lost tension or snapped. This is the single most common Simonton failure we see in Lauderhill, driven by years of humidity working on the springs.
• The window is suddenly hard to open or close. The pivot bar has slipped out of the balance shoe, or the shoe itself has cracked. The window will bind and feel like it’s fighting you, and forcing it usually cracks the shoe further.
• Fog or condensation between the glass panes. The sealed unit has lost its integrity. It’s not a cleaning problem, and it won’t dry out. Once the desiccant in the spacer is saturated, the fog is permanent until the glass is replaced.
• You hear a grinding or popping sound when operating the sash. The balance is binding in the side jamb track, often because the shoe has disengaged on one side. Continuing to operate it will score the vinyl track.
• The tilt latches won’t engage, or one side pops out when the window is closed. The latch spring has failed or the latch itself has worn down. It’s a small part, but it means the sash is not fully seated, which lets air and water in during a Lauderhill afternoon storm.

Replacement Cost & What’s Included

A Simonton window replacement in Lauderhill is priced by the part and the scope, not by a vague multiplier. Here’s what our customers typically see:

• Coil balance or block-and-tackle balance replacement (per sash): $145 to $220 installed, including both balances, the shoe, and the pivot bar if needed.
• Tilt latch and hardware replacement (per sash): $95 to $160 installed.
• Insulated glass unit replacement (per sash): $235 to $610, depending on sash dimensions, Low-E coating, and whether an argon fill is specified.
• Full sash assembly replacement when the frame is sound but the sash is beyond service: $320 to $580 per sash.
• Complete window replacement (tear-out and new Simonton or comparable line): $680 to $1,450 per opening, depending on size, impact rating, and frame condition.

Every quote we write in Lauderhill includes the part, the labor, the haul-away, and the warranty in writing before work begins. We register both warranty layers the day the job is finished, before the truck leaves the driveway. You will not see a change order on a Simonton hardware repair unless we open the wall and find something structural that nobody could have predicted, and if that happens, we stop work and show you before any money changes hands. The Done Right Promise covers the workmanship, and if something is not right, we make it right with no paperwork fights.

DIY or Call Us?

There are a couple of things you can safely check before you call. If the window is fogged between the panes, that’s a sealed unit failure and there’s no homeowner fix that lasts. If the sash is hard to operate, you can look at whether debris has built up in the side tracks and gently clean them with a dry brush. That’s worth ten minutes. What we would rather you not do is attempt to remove a heavy vinyl sash and replace a balance or a pivot bar yourself. A double-hung sash in a big Florida window is heavier than it looks, and when that balance lets go, the sash comes down hard, on your fingers or on the sill. We have taken apart more than one window where a homeowner had a coil balance let loose mid-attempt. It’s not worth the hospital trip or the cracked sash. If you’re in Lauderhill and a Simonton window is giving you trouble, call us at (850) 303-7739 and we will tell you over the phone whether it sounds like a quick fix or a full replacement, before anyone schedules anything.

FAQs