Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Energy-Efficient Windows Across Sunrise
If you’re researching energy-efficient windows in Sunrise, the honest headline is this: most homes here need a full frame-and-sash replacement, not a cheap insert, and the job has to clear both Broward County’s impact code and, in many communities, an HOA architectural review. A typical Sunrise project runs $850 to $1,900 per opening depending on size, glass package, and frame condition. TruePane Windows & Doors has walked dozens of Sunrise homeowners through the permit, the HOA packet, and the install, and Dale Kessler stands behind every job with a written Done Right Promise. Call (850) 303-7739 for a free estimate.
Why TruePane Windows & Doors Is Sunrise’s Preferred Energy-Efficient Windows Company
Sunrise is not a city where you can pull a window out, slide a new one in, and call it done. The ground under most streets is former Everglades wetland, and the rich, damp soil has been settling for fifty years. Rough openings in the CBS homes built from the 1960s through the 1980s are almost never square. When a homeowner sees fogged glass or a room that heats up by 10 a.m., the fix usually involves rebuilding the jamb, flashing it correctly, and re-framing before the new unit goes in. That is exactly the kind of work our crews do every week in Sunrise neighborhoods like Sunrise Golf Village.
Our technicians measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before the truck leaves your driveway. That is what Dale Kessler calls The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated. It is not a slogan. It is the way the paperwork leaves our office on every Sunrise job.
Sunrise homeowners tell us the same thing repeatedly: they want a company that answers the phone when the HOA board flags a grid pattern, or when the stucco crew discovers a rough opening that is an inch out of level. A live person answers our phone 24 hours a day, seven days a week. Not a voicemail tree. Not a regional call center. You call, a person picks up, and that person works for us, not a contract service.
Our Energy-Efficient Windows Services in Sunrise
We offer a full range of energy-efficient window services tailored to what Sunrise homes actually need. Here is how each one works in this market.
ENERGY STAR Replacement Windows
For Sunrise’s older CBS homes, an ENERGY STAR replacement is rarely a pocket insert. The original aluminum frames have been wicking ground-level humidity for decades, and the seal between frame and stucco has failed on most of them. We tear out the old frame, re-flash the opening, and set a properly rated unit that meets both the Florida Product Approval hurricane standard and the ENERGY STAR climate zone for South Florida. Call (850) 303-7739 and we will walk you through what your house actually needs.
Low-E & Argon Gas Glass
Low-E coatings are the workhorse of cooling-cost reduction in Sunrise. They reject solar heat while letting visible light through, and argon gas between the panes slows conductive heat transfer. In a city where air conditioning runs nine months a year, a good low-E, argon-filled double or triple pane unit typically cuts the heat gain through the glass by 40 to 55 percent compared to the original single pane. On a western-facing bedroom in Sunrise Golf Village, that difference is real and measurable within the first electric bill.
Double & Triple Pane Windows
Most Sunrise homes built before the mid-1990s still have single-pane glass. A double-pane unit with low-E and argon is the standard energy upgrade, and a triple-pane unit adds one more layer of insulation and better sound attenuation for homes near University Drive or Sunset Strip. For an older home with aluminum frames, we recommend going to a full frame-and-sash replacement rather than trying to fit a thicker insulated glass unit into a frame that was not built for it. The frame is usually the weak point in Sunrise, not the glass.
UV-Blocking & Fade Protection
Sunlight in Sunrise is relentless, and original single-pane glass does nothing to stop UV radiation from fading hardwood floors, carpet, upholstery, and artwork. A low-E coating with high UV rejection typically blocks 75 to 95 percent of UV rays, depending on the glass package. For homeowners with a western or southern exposure, or with original terrazzo floors and large sliding doors, this is often the single biggest reason to upgrade. We quote UV-blocking packages alongside standard low-E so you can see the cost difference on paper.
Window Energy Audits & Ratings
Before recommending any product, our technicians walk the house with a thermal camera and a moisture meter. In Sunrise, the audit often reveals three or four openings where the frame has separated from the stucco, or where settlement has created a gap the homeowner never noticed. We check the U-factor, solar heat gain coefficient, visible transmittance, and air leakage rating on the existing glass, then show you what a properly rated replacement would deliver. You get the numbers on paper, not a guess.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunrise
We are an authorized installer for, and more than a dozen other manufacturer lines. That means we can quote you two or three comparable models side by side, with different glass packages, different grid patterns, and different price points, and you decide what fits the HOA rules and your budget. Because we do enough volume in Sunrise, we keep local stock of common grids, weatherstripping, and hardware for fast turnaround on warranty work and repairs. You are not waiting on a freight truck from out of state for a sash replacement.
Common Energy-Efficient Windows Problems We See in Sunrise Homes
- Seal failure from corroded aluminum frames. Original aluminum frames in Sunrise absorb ground-level humidity year round, and the metal slowly degrades. Even when homeowners add an insulated glass unit to the old frame, the frame continues to fail, and the new seal breaks down within a few years. The only long-term fix is a full frame-and-sash replacement.
- Out-of-square rough openings that defeat the new sash. The shifting, organic soil under Sunrise causes slab and rough opening movement over decades. A new, perfectly square sash installed into an out-of-square opening leaves gaps at the corners, and those gaps erase the energy gain the glass was supposed to deliver. We rebuild the jamb and flash it before the unit goes in.
- HOA grid and color requirements blocking final inspection. In communities like Sunrise Golf Village, the HOA rules on frame color and grid pattern are as binding as the county permit. If the wrong grid goes in, the final inspection fails and the job sits half-done. We pull the HOA guidelines before we order, and we match them exactly.
- Condensation between the panes in original single-pane frames. A foggy window in an older Sunrise home usually means the seal is gone, not just dirty glass. If the frame is original aluminum, replacing only the insulated glass unit extends the problem rather than solving it. A full replacement with a properly rated unit addresses the frame, the seal, and the glass at once.
Pricing for Energy-Efficient Windows in Sunrise, FL
Here are the ranges we quote in Sunrise for energy-efficient window work. Every price is per opening and assumes a full frame-and-sash replacement unless noted:
- Standard ENERGY STAR double-hung, low-E with argon, vinyl frame: $850 to $1,200 per opening
- Double-hung with impact-rated glass, low-E, argon, vinyl frame: $1,100 to $1,600 per opening
- Full frame-and-sash replacement on an out-of-square CBS opening, including jamb rebuild and flashing: add $180 to $350 per opening
- Triple-pane, low-E, impact-rated, for high-noise or high-heat elevations: $1,400 to $1,900 per opening
- Window energy audit for the entire home: free with any estimate; $89 as a standalone maintenance visit
The two biggest factors in Sunrise are the condition of the rough opening and the HOA’s grid and color requirements. A standard square opening with no HOA constraints runs on the low end. A 1970s villa with settled jambs and a required colonial grid runs higher. We write every quote as a line-item estimate, so you see the glass, the frame, the labor, the flashing, and the permit as separate lines. No change orders. No surprises. Call (850) 303-7739 for a free estimate on your exact house.
We Also Serve Cities Near Sunrise
Our crews serve Sunrise and the surrounding communities, including Lauderhill, Lauderdale Lakes, Tamarac, and North Lauderdale. If you’re in one of those areas and ready to talk about Energy-Efficient Windows, the same team that handles Sunrise jobs is on call. For more about what we do across Sunrise and the nearby communities, call us or click through to the local page.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Energy-Efficient Windows in Sunrise
Because Sunrise sits on former Everglades wetland with organically rich, shifting soil. The rough openings in 1960s to 1980s CBS homes are almost never square, and the original aluminum frames have corroded from decades of ground-level humidity. An insert replacement leaves the failed frame in place and the out-of-square opening unfixed, which dooms the new insulated glass unit to the same seal failure. A full tear-out lets us rebuild the jamb, flash the opening, and set a square, properly rated frame that will hold. Call (850) 303-7739 and we will tell you honestly whether your openings need a full replacement or whether an insert is viable.
HOA rules can add two to six weeks to the calendar, depending on the community. Many 1970s villa and townhome communities in Sunrise, including Sunrise Golf Village, have deed restrictions on frame color and grid pattern, and the architectural review committee meets on a set schedule. We pull the HOA guidelines before we order the windows, we file the submittal packet for you, and we schedule the install after the approval comes back. That way the windows are on site and the crew is ready, instead of the job stalling half-finished at a committee table.
Yes. Impact-rated glass can carry a low-E coating and argon fill at the same time. The hurricane code addresses wind and debris resistance, while low-E and argon address heat gain and U-factor. They are separate properties of the glass package and they combine without conflict. We quote impact-rated, low-E, argon-filled units for Sunrise homes as a standard option, and we register the manufacturer warranty layers on both the impact rating and the glass coating in writing.
If the frames are original aluminum, the fog is a symptom of a failed frame, not just a failed seal. Even when the frame looks fine from the outside, the aluminum has been wicking moisture for decades in Sunrise’s ground-level humidity, and the new insulated glass unit will fail again within a few years. For original aluminum frames, we recommend a full frame-and-sash tear-out. If the frame is a newer vinyl or fiberglass unit that is still square and properly flashed, a glass-only replacement may be justified. We will tell you which one your house needs after we inspect it. Call (850) 303-7739 for a free assessment.
Plan for two to six weeks of architectural review time in Sunrise’s HOA-governed communities, on top of the Broward County permit review. That is a bigger window than most contractors quote, and it is why we file the HOA submittal packet and the permit application in parallel, not sequentially. The county reviews the structural and impact requirements, the HOA reviews the color, grid, and style, and we order materials once both are moving so the install is not sitting half-finished waiting on a committee. We will give you a written calendar at the estimate and we stand behind the schedule.
Ready for Windows That Are Done Right in Sunrise?
If your Sunrise home still has original single-pane aluminum windows, you are paying for it every month in cooling costs, and the fix is a full frame-and-sash replacement with a properly rated energy package. We measure every opening twice, quote the glass and the frame side by side on paper, and register both warranty layers before the truck leaves your driveway. Dale Kessler’s founding rule still governs every job: if the pane is not true, the job is not done. Call (850) 303-7739 to schedule your free estimate. A live person answers, 24/7.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Sunrise and the surrounding communities with energy-efficient window replacement and repair.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.