Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Coconut Creek
Door installation in Coconut Creek runs $800 to $4,200 for most projects, depending on whether you’re replacing a condo entry door, swapping an old slider for impact-rated glass, or converting a jalousie opening to a proper swing door. We handle the full sequence: measuring the opening twice, submitting condo association paperwork when required, pulling the Broward County permit, and setting the door square so it closes tight against Florida humidity. Call (850) 303-7739 for a free estimate, and we’ll come out to your place in Coconut Creek, take measurements, and put the numbers on paper before you commit to anything.
Our crews work in Coconut Creek regularly. We know the difference between a Wynmoor Village garden apartment and a CBS single-family home off Lyons Road, and we know which projects need HOA sign-off before the county will even look at the permit. That local knowledge saves you weeks of delay and a lot of phone calls.
Why TruePane Windows & Doors Is Coconut Creek’s Preferred Door Installation Company
We’ve been installing doors in South Florida for long enough to know that Coconut Creek is its own animal. The bulk of the housing stock dates back to the 1970s and 1980s: low-rise condo buildings inside gated 55+ communities, with original aluminum sliders and single-pane entry doors that were never built to meet today’s wind codes. Homeowners here are not looking for a quick swap. They’re looking for someone who understands their condo board, their HOA’s architectural review process, and the county’s High-Velocity Hurricane Zone requirements.
Dale Kessler founded TruePane in 2008 on a rule that gets written on the shop whiteboard: if the pane is not true, the job is not done. That applies to every door we set. The threshold sits flat. The strike plate lines up. The weatherstripping seals against the afternoon rain that blows through Coconut Creek in August. We don’t leave until it’s right, and we put that promise in writing.
Our technicians are background-checked and uniformed. They measure every opening twice. They quote manufacturer lines side by side on paper so you can see exactly what you’re paying for. And when we register both warranty layers under The Keystone Standard before the truck leaves your driveway, you get the durations in writing, not a verbal handshake.
Our Door Installation Services in Coconut Creek
Entry & Swing Doors
Most Coconut Creek condo buildings were built with cheap hollow-core entry doors or thin aluminum frames that bind when the building settles. We replace them with solid-core doors rated for the Florida Building Code wind zone, set in a properly shimmed and flashed frame. In communities like Wynmoor Village, the board often has specific style requirements: paint color, hinge finish, even the direction the door swings. We handle the architectural submission with the drawings and product specs they need, before we order anything. A typical entry door replacement in Coconut Creek runs $1,200 to $2,800 installed, including the old door hauled away.
Double & French Doors
Sliding glass doors are the weak point in most Coconut Creek condos: aluminum tracks corroded by years of AC condensation, rollers seized, glass that’s still single-pane. We replace them with French doors that meet the 140 mph design pressure requirement. That usually means impact-rated glass, a fusion-welded vinyl or aluminum frame, and proper flashing tape at the sill. In a Wynmoor garden apartment, we recently pulled a corroded slider and set an impact-rated Andersen French door in its place. The HOA wanted architectural drawings six weeks before the county permit. We had already filed them. The resident now has a low-threshold entry that clears her walker. French door installation in Coconut Creek typically runs $2,400 to $4,200 for a standard opening.
Storm Doors
In a high-velocity hurricane zone, a storm door is not a substitute for an impact-rated entry door. It’s a sweat vent and an extra layer against wind-driven rain. We install storm doors on single-family homes in Coconut Creek where the main entry already has impact glass, so the storm door adds ventilation without becoming a projectile in a storm. Most storm door installs run $450 to $1,100 in Coconut Creek, depending on glass type and whether the existing frame needs repair.
Pivot Doors
Pivot doors show up less often in Coconut Creek than in newer construction, but some custom single-family homes along the western edge of the city are starting to use them for front entries. A pivot door hinges from the top and bottom rather than the side, which lets you run a much wider slab without sagging hinges. We order these custom, verify the rough opening and the header before the slab is built, and install them with a continuous threshold that meets impact-rating code. Pivot door installation starts around $3,500 and goes up from there depending on slab size and glass.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Coconut Creek
Our Door Installation team is an authorized installer for more than a dozen manufacturer lines, so we can quote you side by side on paper rather than steering you toward one brand. In Coconut Creek, we most often install PGT and CGI impact-rated doors because they’re built specifically for South Florida wind loads and their warranty departments actually answer the phone. We also carry Simonton for certain retrofit applications. If you have a brand preference, tell us up front and we’ll quote it honestly against what we recommend.
Common Door Installation Problems We See in Coconut Creek Homes
- Condo board stops the job mid-install. A contractor pulls the county permit before getting written HOA approval. The association issues a stop-work order, and the homeowner is left with a door leaning against the living room wall for six weeks. We file the board submission first, every time.
- Wrong design pressure rating. An exterior door gets replaced with a non-impact unit rated for 120 mph when Broward County requires 140 mph. The HOA’s architectural committee rejects it during a routine inspection, and the whole job has to be redone at cost. We verify the DP rating against the Florida Building Code before ordering.
- Thresholds that block walkers. In Coconut Creek’s 55+ communities, a standard saddle threshold creates a 2-inch lip that catches wheelchairs and walkers. We install low-profile or zero-threshold sills where code allows, and we check that clearance before the door is set.
- Corroded slider tracks. AC condensate dripping onto rollers eats through aluminum tracks within a decade. The door gets heavy, then the rollers seize, then the panel comes off the track. In most cases, replacing the whole slider with a French door makes more sense than fighting the old frame.
Pricing for Door Installation in Coconut Creek, FL
Here are honest numbers for the Coconut Creek market. Entry door replacement: $1,200 to $2,800. Impact-rated French door: $2,400 to $4,200. Storm door: $450 to $1,100. Pivot door: $3,500 and up. What moves the price is the wind load requirement, the condition of the rough opening, and whether your condo association requires specific finishes or hardware. A straight swap on a CBS home with an intact opening lands at the low end. A Wynmoor Village door that needs jamb repair, new flashing, and HOA-specified hardware lands at the high end. We price line by line on paper. Call (850) 303-7739 to schedule a free estimate, and you’ll have exact numbers before you decide anything.
We Also Serve Cities Near Coconut Creek
Our Door Installation in Coconut Creek crews cover the surrounding area too. If you’re in Margate, Pompano Beach, Coral Springs, or Fort Lauderdale, we handle the same impact-rated installs, the same HOA paperwork, and the same written warranty registration. Same phone number, same crew standards, same square deal.
Serving Coconut Creek, FL - Our Local Coverage Area
We’re based in the Coconut Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Coconut Creek
Yes. In Wynmoor Village and most Coconut Creek condo associations, you need written architectural approval from the board before Broward County will issue a permit for any exterior door replacement. The board reviews the door style, finish, hardware, and wind rating, and their process runs on their own schedule, independent of the county. We file the board submission weeks before ordering glass. Call (850) 303-7739 and we’ll walk you through the sequence.
Coconut Creek sits in Florida’s High-Velocity Hurricane Zone, which means exterior doors must be rated for design wind speeds of 140 mph or higher under the Florida Building Code. That typically means impact-rated glass or a missile-rated core, plus a properly flashed frame. We verify the design pressure rating on every door we install and register both warranty layers in writing.
Interior modifications like wider doorways or walk-in showers inside your existing condo footprint often do not require a building permit, but they usually require your condo association to sign off on any work that touches shared walls or plumbing. We’ll tell you straight what needs approval and what doesn’t. For a wider doorway, we reframe the opening, relocate the light switches, and patch the drywall so it looks original. Most interior doorway work in Coconut Creek runs $800 to $2,500 depending on the wall and finish work involved.
Most Coconut Creek condos have original aluminum sliders from the 1970s and 1980s, and the tracks sit directly under the air handler or in the path of daily AC condensation. Condensation drips onto the rollers, the aluminum oxidizes, and the rollers seize within a few years of neglect. Once the track is pitted, the panels drag and eventually come off the track. At that point, the most economical fix is usually a new impact-rated French door with a low-threshold sill. Call (850) 303-7739 for an exact quote.
If you leave Coconut Creek for months at a time, a storm door only makes sense on a home where the main entry already has impact-rated glass. The storm door vents humidity and lets air circulate while you’re away, but it does not add hurricane protection. If your main door is still the original single-pane unit, replace that first. For seasonal residents, we also recommend low-maintenance fiberglass frames and swept sills that don’t trap water. We’ll quote both options side by side so you can decide with numbers in hand.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Coconut Creek door installation projects with written warranties and a Done Right Promise on every job.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.