Entry Doors

Entry Doors in Lauderhill, FL | TruePane Windows & Doors

An entry door in South Florida does two jobs at once. It sets the tone for the whole house, and it has to hold its ground when a storm pushes against it. Our Entry Doors Impact Series is a Therma-Tru fiberglass and steel door system built for both. We install it across Lauderhill, Broward County, and nearby communities with the same care we give every hurricane-rated opening we touch. If you’re replacing a tired front door or selecting one for new construction, call TruePane Windows & Doors at (850) 303-7739 for a free on-site measurement and line-item quote.

Call (850) 303-7739

Product Overview - Entry Doors

The Entry Doors Impact Series is a fiberglass and steel entry door system engineered specifically for hurricane-prone construction. What makes it different from a standard front door is the way the slab, frame, and impact-rated glass work together as one tested assembly. When we install one in Lauderhill, the entire system carries the engineering, not just the glass insert.

These doors suit almost any architectural style you’ll find across Lauderhill and central Broward. On a 1960s ranch near Inverrary, a solid-panel fiberglass door in a paintable woodgrain finish blends right in. On a newer Mediterranean-style home west of University Drive, a black steel door with a decorative impact glass insert looks sharp without compromising the wind rating. The Therma-Tru lines we carry give you factory-finished colors or paint-grade surfaces, so the door arrives ready to hang or ready for your painter. You don’t have to choose between curb appeal and code compliance, because this series was built to deliver both.

Technical Specifications

• Frame materials: Fiberglass and steel, selected per configuration and exposure
• Maximum size: Up to 48 inches wide, depending on configuration and wind zone
• Glass options: Decorative impact glass insert, Low-E insulated glass insert, or no glass (solid panel)
• Finish options: White, black, bronze, and paintable woodgrain
• Impact glazing: Laminated glass with a PVB interlayer where glazing is selected
• Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers available per configuration
• Design pressure: Matched to your wind zone, up to +/-100, never higher

All values above are per-configuration. Our team verifies the exact unit against your Lauderhill address, exposure category, and permit package before we quote.

Hurricane & Compliance Performance

Laminated Impact Glass - When your door includes glass, it’s laminated impact glass with a PVB (polyvinyl butyral) interlayer. That interlayer is what holds the glass in the frame under impact, keeping the opening sealed even if the outer pane cracks. It’s the same approach used in our impact windows across Lauderhill.

Miami-Dade NOA / FL Product Approval - Each configuration carries a Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval number. These are issued per configuration, so we verify the exact numbers on your specific quote and provide them with your permit submittal package.

FBC / HVHZ Compliance - The Entry Doors Impact Series is engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements. That’s the standard Lauderhill and the rest of Broward County enforce for exterior openings in new construction and major remodels.

TAS 201 / 202 / 203 Testing Context - HVHZ-rated products are tested under a specific protocol family: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. This door system is evaluated within that testing context, which is what the NOA ultimately references.

Design Pressure for Your Wind Zone - Design pressures are matched to your wind zone, up to +/-100, never higher. We don’t oversell a rating your home doesn’t need, and we don’t under-spec one that could fail your inspection. Your exact DP requirement depends on your Lauderhill location, building height, and exposure category.

Energy Performance - Low-E and insulated glass options are available for the glazed configurations. That matters in Lauderhill summers, where a west-facing entry door can radiate heat into the foyer all afternoon. The insulated glass helps keep that entryway comfortable without changing the door’s impact rating.

Color & Glass Options

Finish selection drives the look of the whole entryway. White and bronze remain the most common choices in Lauderhill’s older neighborhoods, where they match existing trim and window frames without drawing attention. Black is a popular upgrade on contemporary and Mediterranean elevations, particularly with a decorative glass insert. The paintable woodgrain finish gives you a true wood texture without the maintenance of real wood in a humid, storm-exposed climate. It’s a pragmatic choice for homeowners who want a custom color but still need the durability of fiberglass.

On the glass side, the solid panel is the most private and the most thermally efficient option. A decorative impact glass insert adds light and style to the entry while maintaining the full impact rating. Low-E insulated glass is the right pick when the door faces direct afternoon sun, as many front entries do throughout central Broward. We’ll walk you through all three during your consultation in Lauderhill.

Installation by TruePane Windows & Doors in Lauderhill

An impact-rated entry door is only as good as its installation. A door that meets every TAS standard on paper can still leak or fail under wind load if it’s not set correctly. That’s why we control the full process, from measurement to final walkthrough.

Every Lauderhill installation starts with a pre-install inspection of the rough opening. We check the subfloor, the framing, the existing weather barrier, and the condition of the surrounding wall. If the rough opening isn’t square, we correct it before the door goes in. The door is then set level, plumb, and square, with shims placed at the hinge and strike points to carry the load properly. We follow AAMA 2400/2410 standard practice for window and door installation, and we seal the perimeter with AAMA 812 low-expansion foam before finishing with an exterior-grade sealant. Finally, we run a water test on the threshold and sidelight joints, clean the site, and walk the door with you to confirm operation, latching, and finish condition.

Permitting matters in Lauderhill. HVHZ jurisdictions in Broward County require engineered product approvals on the permit application, and your contractor has to know how to present them correctly. We provide the NOA and Florida Product Approval documentation for your specific configuration, and we know what the local building department expects to see. Improper installation compromises the tested system, so this is work we never rush.

Frequently Asked Questions - Entry Doors

What wind zone / design pressure is the Entry Doors rated for? Design pressures are matched to your wind zone, up to +/-100, never higher. The exact DP requirement for your home depends on your location in Lauderhill, your exposure category, and the door configuration. Call (850) 303-7739 and we’ll confirm the correct rating for your address during the estimate.

What is the lead time? Most Entry Doors Impact Series configurations run four to six weeks from approved drawings and deposit, though factory-finished units and custom sizes can run longer depending on the season and the manufacturer’s schedule. We confirm the current lead time on your quote so there are no surprises.

Does it require a Miami-Dade NOA or Florida Product Approval submittal for my permit? Yes. In Lauderhill and throughout Broward County, your permit application needs the product approval documentation for the specific door configuration. We provide the NOA and Florida Product Approval numbers with your permit package and handle the submittal as part of the installation.

Can I customize the size or configuration? Yes, within the product’s rated limits. The door system goes up to 48 inches wide, and we can configure it with solid panel, decorative impact glass, or Low-E insulated glass depending on your opening and wind zone. Custom configurations may require engineering review, which we manage for you.

How do I maintain the frame? Wash the frame with mild soap and water twice a year, check the weatherstripping and sweep at the bottom for wear, and keep the threshold clear of debris. For the finish, factory-finished units just need occasional cleaning. Paint-grade woodgrain finishes should be painted with a quality exterior acrylic and inspected yearly for chips or scratches.

Have another question about your entry door project in Lauderhill? Call (850) 303-7739 and we’ll give you a straight answer.

Get a Quote - Entry Doors in Lauderhill

Ready to price an Entry Doors Impact Series door for your Lauderhill home? We’ll come out, measure the opening, confirm your wind zone and exposure, and put together a written line-item quote with the exact configuration, finish, and lead time. Call TruePane Windows & Doors at (850) 303-7739 to schedule your free on-site measurement. We serve all of Lauderhill and central Broward County.

Written by the team at TruePane Windows & Doors, serving Lauderhill, FL and surrounding Broward County communities.