Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterMr-Glass Custom & Geometric Windows in Lauderhill: What to Know First
TruePane Windows & Doors provides independent Mr-Glass custom and geometric window service in Lauderhill, covering arched, radius, angled, and oversized openings that standard glazing shops will not touch. Most Mr-Glass custom window repairs in Lauderhill run between $285 and $1,900 depending on whether we are replacing a failed seal, fabricating a new insulated glass unit, or rebuilding the frame around a geometric opening. We are not affiliated with Mr-Glass as a manufacturer-authorized service provider, but we have measured, set, and sealed enough of their shaped units across Broward County to know exactly how they fail and what it takes to fix them right. This page is for Mr-Glass owners who want straight answers on cost, turnaround, and the parts decision. Call (850) 303-7739 and a live person answers, day or night.
How Mr-Glass Products Fail - and How We Fix Them
- Seal failure on radius-top units. Mr-Glass arched windows in Lauderhill homes regularly develop fogging along the curved edge first. The cause is almost always the same: the flexible spacer bar used in curved insulated glass takes on more stress than a straight-line spacer, and Lauderhill’s wet-season humidity finds the weak point within eight to twelve years. We replace the IG unit with a fresh curved lite matched to the original radius, not a cobbled-together straight-bar retrofit.
- Sash sag on oversized trapezoids and parallelograms. Large geometric Mr-Glass sashes, especially those over 48 inches on the longest side, gradually pull the hardware out of square. The weight of the glass works against the factory hinge and roller assemblies. We rebuild the sash rather than shim it, resetting the frame and replacing worn hardware before the glass stress-cracks.
- Frame sealant breakdown around hexagonal and octagonal fixed units. Lauderhill’s afternoon thunderstorms put a lot of water against geometric windows with multiple mitre joints. The factory sealant at those corners is typically the first thing to go. We strip the old bead, clean the joint, and re-seal with a marine-grade polyurethane rated for South Florida exposure. It bonds better than the original and lasts longer in the heat.
- Impact-rated Mr-Glass units losing their laminate clarity. We see this most often on the larger geometric impact windows installed after Hurricane Wilma. The interlayer between the glass panes starts to cloud from continued UV exposure and temperature cycling. If the frame and seal are sound, we replace just the laminated glass pack, which costs significantly less than a full window swap.
- Improper installation causing bowed frames on curved units. Some Mr-Glass geometric windows we see in Lauderhill were never set correctly from day one. The rough opening was out of tolerance, and the installer forced the frame to fit. That tension eventually shows up as a bow in the frame and a window that will not close cleanly. We pull the unit, correct the opening, and reset it so the glass sits without stress.
Our Mr-Glass Custom & Geometric Windows Process
- 1
We measure twice and photograph everything. A background-checked, uniformed technician arrives at your Lauderhill home, measures every opening twice, and documents the existing unit before any work begins.
- 2
We diagnose the failure and explain it in plain language. You get a clear answer on what went wrong, whether it is a seal, a frame, the glass pack, or the installation. If the spec sheet doesn’t back it up, we don’t say it.
- 3
We present the parts decision on paper. For Mr-Glass units, we lay out OEM versus quality aftermarket options side by side with pricing. You choose; we just make sure you know what you are buying.
- 4
We complete the work in one visit when possible. Most Mr-Glass custom window repairs are done the same day. If a curved IG unit has to be fabricated, we schedule the return trip before we leave.
- 5
We test the window and register every warranty layer. Before the truck pulls out, we operate the window in front of you and confirm both warranty layers are registered in writing.
- 6
We stand behind it for 90 days. The Done Right Promise covers the workmanship. If it is not done right, we make it right with no paperwork and no arguing.
What Mr-Glass Custom & Geometric Windows Costs in Lauderhill
Here are honest numbers for the Mr-Glass jobs we handle in Lauderhill. We quote firm prices before work starts, and the price on the quote is the price on the bill. No surprise line items, no change orders written after the fact.
- Curved or arched IG unit replacement: $485 to $1,200 depending on size and glass type
- Seal repair and re-sealing on a geometric fixed unit: $285 to $560
- Sash rebuild with new hardware on an oversized geometric window: $600 to $1,400
- Full frame reset on a bowed geometric unit: $800 to $1,900
- Complete replacement of a custom Mr-Glass impact window: $1,700 to $4,500 depending on size, radius, and glass rating
What moves the price: the size of the unit, whether the glass is impact-rated, the complexity of the curve or angle, and whether the frame is salvageable. We do not pad the number for a hard opening. Call (850) 303-7739 for a free estimate we can put in writing.
Why Lauderhill Homeowners Call TruePane Windows & Doors for Mr-Glass Work
We have been serving local communities since 2008, and a good portion of that time has been spent on windows other shops won’t touch. Dale Kessler grew up off Oakland Park Boulevard, learned the trade from his father, and built TruePane Windows & Doors on a simple rule: if the pane is not true, the job is not done. Our technicians are background-checked and uniformed, and when they work in your Lauderhill home, they work the way they would in their own mother’s. We also service PGT, CGI, CWS, and ES Windows products, so if your Mr-Glass window shares a wall with another brand, one call covers it. A live person answers the phone 24 hours a day, 7 days a week. That’s a promise we have never broken.
FAQs
Yes, most Mr-Glass hardware and glass components are still obtainable, though some curved IG units have to be fabricated rather than ordered stock. We source OEM parts where available and use quality aftermarket equivalents when the original part is discontinued or has a known failure pattern.
If the frame is square and the glass failure is the only issue, repair is nearly always the better value in Lauderhill’s climate. Replacement only makes sense when the frame is bowed, rotted, or the original install was so far out of tolerance that correcting it would cost more than new glass.
We are an independent Mr-Glass service provider, not a manufacturer-authorized warranty agent. What we do is register every applicable warranty layer we can on the materials we install, and we back our workmanship with the Done Right Promise in writing.
Most seal and hardware repairs are completed in a single visit. If a curved IG unit needs to be fabricated, that adds one to two weeks because the glass has to be made to the original radius. Call (850) 303-7739 and we will tell you straight what the timeline looks like for your specific window.
No. We quote firm prices after measuring and diagnosing the problem. The only time the number changes is if we find something hidden that genuinely changes the scope, and we will stop and show you before any additional work is done. Call (850) 303-7739 for your free estimate.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Lauderhill and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.