Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Mr-Glass Window Installation: The Lauderhill Owner’s Guide
We stock and install Mr-Glass-compatible window installation parts across Lauderhill, with most replacements running $180-$420 installed depending on the sash style, glass package, and whether the frame needs resetting. Most Mr-Glass replacement parts we handle are done the same day once we’ve confirmed the model and measurements. If the spec sheet doesn’t back it up, we don’t say it. What we can tell you is this: you’ll usually notice the failure before you can name it. A window that won’t close square, a sash that drops an inch when you unlock it, condensation that never clears between the panes, or a room that suddenly drafts like the window’s been left cracked open. That’s the part telling you it’s done, and in South Florida humidity, it’s usually a seal or a balance that gave out first.
Which Mr-Glass Models This Applies To
Mr-Glass has been a South Florida workhorse for decades, and we’ve worked on enough of their single-hung, horizontal roller, and fixed-lite series to know the quirks. The critical thing with Mr-Glass is not assuming the frame label tells the whole story. The sash stamping and the glass spacer measurement matter more. If you can find the etched corner mark on the glass or a sticker inside the frame channel, that’s the fastest path to the right part. If not, we measure the sash thickness and the balance shoe profile on site.
One compatibility gotcha we see regularly in Lauderhill homes: Mr-Glass windows installed in the 1990s and early 2000s often used a narrower balance channel than the later production runs. An off-the-shelf replacement shoe won’t seat properly, even when the width looks right to the eye. We stock both the standard and the narrow-profile shoe on the truck, plus the OEM-equivalent spiral balances for the single-hung lines. For glass, we match the original low-E coating and spacer thickness rather than dropping in generic insulated units. A mismatched spacer in a Lauderhill west-facing wall is a fogged seal waiting to happen, sometimes within two years.
OEM versus aftermarket for Mr-Glass: the OEM balances and locks are still the cleaner fit on most series, and we quote them as the default. The aftermarket equivalents we carry are only offered where they match or exceed the original spec, and we’ll show you both prices on paper before we start. TruePane Windows & Doors is an independent installer and parts provider. We’re not affiliated with Mr-Glass, which means we’re free to tell you straight when a part is worth the OEM price and when it’s not.
Signs Your Mr-Glass Window Installation Is Failing
- The sash won’t stay up without a prop. The spiral balance or block-and-tackle assembly has lost tension. In Lauderhill’s heat, the balance tube lubricant degrades faster, and the spring inside slowly unwinds until the sash dead-drops.
- Condensation or haze between the panes. The seal around the insulated glass unit has failed, and now moist Florida air is circulating inside. No amount of cleaning fixes this. The glass unit itself is spent.
- The window locks but still rattles in wind. The lock keeper or the sash cam is worn past tolerance, or the weatherstripping has compressed so far the sash floats in the frame. You’ll feel it first on the east side of the house during afternoon storms.
- The window binds or scrapes when you slide it. The frame has shifted, usually from stucco settlement or a water-damaged sill, or the roller assembly on a horizontal slider has flat-spotted. Forcing it wears the track and makes the eventual repair more expensive.
- You can feel air moving around a closed window. The weatherstripping or the corner seals have failed. This is the one homeowners tolerate the longest, and it’s the one that quietly runs up the AC bill every month from April through October.
Replacement Cost & What’s Included
In Lauderhill, a Mr-Glass window installation part replacement lands within a predictable range. A single balance replacement runs $180-$260 with labor. A new insulated glass unit starts around $240 and climbs to $420 for larger low-E panels on second-story windows. A full sash rebuild, where we replace the balance, the pivot shoes, and the weatherstripping in one visit, typically lands between $320 and $480 per window. The price shifts with glass package, sash size, and whether we’re working from a ladder or a stable interior position.
What you get with that number: the part itself, the labor to set it correctly, and a written line-item quote before we touch anything. No surprise line items on the bill. Both manufacturer warranty layers get registered in writing before the truck leaves your driveway, and our Done Right Promise covers the workmanship. If it’s not done right, we make it right with no paperwork fights and no arguing. That’s the whole point of The Keystone Standard.
DIY or Call Us?
You can safely identify a failed balance by unlocking the window and lifting the sash. If it drops hard or won’t hold, that’s the balance. If you see haze inside the glass, that’s a failed seal. Checking costs you nothing but a few minutes. The actual replacement is where it goes sideways. A spiral balance under tension can release quickly enough to cut a hand. A glass unit that’s not seated square in the sash will bind, and the sash will never slide right again. And a window that’s been binding for a year often has hidden frame damage you won’t see until the sash is out.
This is the kind of job where doing it twice costs more than doing it once. If you’re in Lauderhill and want a straight answer on the part and the price, call (850) 303-7739 and we’ll walk you through what you’re looking at. A live person answers, day or night.
FAQs
Balances and seals on Mr-Glass windows in South Florida typically last 12-18 years before failure, with west-facing windows and windows exposed to full afternoon sun tending to fail on the earlier side. The humidity and salt air here shorten seal life compared to inland climates by roughly 20-30%. Call (850) 303-7739 for an exact assessment of your windows.
No, not reliably. Once a spiral balance loses tension or an insulated glass seal lets go, the component is done. Rebuilding a spent balance sometimes works for a season, but in Lauderhill’s heat it fails again quickly. We replace with OEM or proven equivalent parts so you’re not paying for the same repair twice. Call (850) 303-7739 for a straight answer on your window.
A single balance or glass unit replacement on a Mr-Glass window takes 45-90 minutes once we’re on site. A full sash rebuild runs up to two hours per window. Most jobs are completed in a single visit, which is how we prefer to leave it. Call (850) 303-7739 to schedule a look.
Yes, we keep the common Mr-Glass balance profiles, pivot shoes, and weatherstripping on the truck, and we carry glass units sized for the most common Lauderhill configurations. If your window needs a custom-cut glass panel, that part gets ordered and typically arrives within a week. Call (850) 303-7739 and we’ll tell you what we can do the same day.
Get Your Mr-Glass Window Fixed in Lauderhill
If your Mr-Glass window is failing, the fix is usually simpler than the dread suggests. We’ll measure the sash, identify the exact part, and give you a written price before any work begins. We’ve been doing this work across Lauderhill and Broward County for years, and Dale Kessler grew up right off Oakland Park Boulevard, learning window work from his father before he could drive. This is not a franchise playbook. It’s a local trade, done right, and we stand behind it. Call (850) 303-7739 to schedule your free estimate.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Lauderhill and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After