Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Roof Replacement & Installation in Lauderhill: What to Know First
CGI roof replacement and installation in Lauderhill is work we take on as an independent CGI service provider, not as a manufacturer-authorized dealer. Most CGI roof jobs we handle are completed in one to three days depending on roof size and framing condition, and we quote every job with fixed line-item pricing before any materials are ordered. If you own a CGI roof in Lauderhill and need it replaced or installed, call (850) 303-7739 for a free estimate. This page is for homeowners who have a CGI product, want the work done right, and want to know exactly what they’re paying before anyone sets foot on the roof.
Key Takeaways
- We install and replace CGI roof systems across Lauderhill as an independent provider, not a corporate installer.
- Every CGI job carries our Done Right Promise and The Keystone Standard, with both warranty layers registered in writing.
- Fixed pricing, no change orders, and a live person answers the phone 24 hours a day, 7 days a week.
- We work with other South Florida impact brands too, including PGT, CWS, ES Windows, and ECO Window Systems.
How CGI Products Fail - and How We Fix Them
CGI makes solid impact-rated roof and window products, but after enough Lauderhill summers and hurricane seasons, we see the same failure patterns show up. Here are the five we fix most often:
- Flashing separation on CGI’s standing seam panels. Lauderhill’s wet season puts standing water on roof seams for weeks at a time. The factory flashing on older CGI roof systems pulls away from the panel edge, especially where two roof planes meet. We strip the old flashing, inspect the panel lip, and reseat the seam with a mechanically fastened replacement rated for the same wind zone.
- Uplift at the eave line on CGI’s corrugated profile. The screw pattern CGI specifies is good for the product, but older installations often skipped the eave reinforcement row. We see panels lifting at the leading edge after a couple of tropical storm seasons. The fix is not a new roof; it’s adding the recommended fastener row and resecuring the eave trim.
- Rust bloom around the fastener heads on CGI’s galvanized lines. This is almost always caused by the wrong fastener being used during the original installation, not by the CGI panel itself. Water sits in the fastener head and the coating fails. We replace the fasteners with a mismatched-coating-compatible option and reseal the penetration so it does not return.
- Ponding water on low-slope CGI roof sections in Lauderhill. A lot of homes in the Lauderhill area were built with roof slopes that barely meet code. We see CGI roof panels on a 1/12 or 2/12 slope holding water after every afternoon storm. That leads to premature coating wear. If the framing allows, we add tapered insulation or a modified drain path so water actually leaves the roof.
- Through-wall leak at CGI’s vent pipe boots. The factory boot CGI supplies is a standard rubber collar. In Lauderhill’s heat, that collar hardens in three or four years and splits where it meets the pipe. We replace it with a silicone-based boot that keeps its flex in the heat, then retest the whole roof penetration.
Our CGI Roof Replacement & Installation Process
Every CGI roof job we do in Lauderhill follows the same order of operations. No shortcuts, no surprises.
- 1
Call and schedule your free estimate. A live person answers, we set a time that works, and we show up when we say we will.
- 2
Full roof inspection and measurements. We walk the roof, check the decking, measure every plane twice, and document what’s actually failing. If the spec sheet doesn’t back it up, we don’t say it.
- 3
Side-by-side parts and materials decision. We show you the CGI product options and, if an aftermarket part makes more sense, we show you that too. OEM parts are used when they match the existing system. If a better aftermarket option exists, we tell you why and put it in writing.
- 4
Fixed quote with line items. You see the material cost, the labor cost, and the permit cost as separate lines. The price we quote is the price you pay. We don’t file change orders because we don’t create the conditions for one.
- 5
Installation day. Our background-checked, uniformed technicians do the removal, decking repair if needed, panel installation, flashing, and seal testing. Every opening and seam is checked before we call the job done.
- 6
Final walkthrough and warranty registration. We walk the roof with you, show you the finished work, and register both warranty layers in writing before the truck leaves your driveway. Our Done Right Promise covers everything else.
What CGI Roof Replacement & Installation Costs in Lauderhill
CGI roof work in Lauderhill is priced by the square foot, the roof slope, and how much decking repair is needed. Here are honest ranges for the work we do most often:
- Full CGI roof replacement: $6.50 to $9.80 per square foot installed, depending on the CGI profile and the existing decking condition.
- Partial CGI roof repair (flashing, fasteners, boot replacement): $450 to $1,800 depending on how many penetrations and seams are involved.
- Decking replacement under CGI panels: $2.10 to $3.40 per square foot when the existing plywood or OSB has rotted.
- CGI roof installation on a new addition: $7.00 to $10.50 per square foot, including the underlayment and flashing package.
What moves the price most is the roof slope and the condition of what’s underneath the metal. A low-slope roof with ponding water is always more involved than a straightforward gable roof. Every estimate we give is fixed, written, and free. Call (850) 303-7739 and we’ll give you exact numbers for your roof.
Why Lauderhill Homeowners Call TruePane Windows & Doors for CGI Work
We’ve been doing this work in Lauderhill and across Broward County since 2008, and we plan to be doing it for thirty more. That changes how we handle every job. Our technicians are background-checked and uniformed, which matters when they’re walking across your roof and through your home. The Done Right Promise means if something is not done right, we make it right, no paperwork and no arguing. And because we’re an independent service provider for more than a dozen manufacturer lines, we don’t have a reason to force a CGI part when a PGT, CWS, ES Windows, or ECO Window Systems option is the better call. We give you the straight answer and let you decide with the numbers on paper in front of you.
FAQs
We handle both full CGI roof replacement and targeted repairs in Lauderhill. The decision comes down to the age of the roof, the extent of the corrosion or uplift, and the condition of the decking underneath. We’ll give you a straight recommendation either way. Call (850) 303-7739 for a free inspection and quote.
It depends on which warranty layer is active. CGI’s standard product warranty covers manufacturing defects regardless of who installs the roof, if the installation follows the published spec. The installer workmanship warranty is separate, and ours is the Done Right Promise. We register both warranty layers in writing before the truck leaves your driveway, so you know exactly what’s covered and for how long.
Most full CGI roof replacements in Lauderhill take one to three days once materials are on site. If the decking needs significant replacement, add a day. We schedule the work in one go, not in pieces spread across two weeks. You’ll get a written timeline with your estimate, and we hold to it.
We use both, and we tell you which is which before we order anything. OEM CGI parts are used when they match the existing system and the manufacturer’s spec matters. Aftermarket flashing, fasteners, and boots are used when they outperform the original part for Lauderhill’s climate, particularly on older roofs where the original spec has already failed. You’ll see both options on paper with line-item pricing.
In most cases, a partial replacement works if the panel profile is still being manufactured and the undamaged panels are still seating correctly. We’ll tell you if a partial fix will look mismatched or if the corrosion has spread far enough that a full replacement makes more financial sense. The choice stays yours, but you’ll have our honest recommendation in writing first.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Lauderhill and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.