Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Roof Repair in Lauderhill: What to Know First
CGI roof repair in Lauderhill typically runs between $350 and $1,800 depending on whether we’re addressing a failed seal, replacing a damaged glass unit, or rebuilding the curb frame around an older CGI skylight or roof window. Most CGI roof repairs on impact-rated units take one visit, and we carry the common CGI weatherstripping, gaskets, and sealant systems on the truck so you’re not waiting on a second appointment. Call (850) 303-7739 and you’ll get a live person who can tell you the same thing we’d tell you standing in your driveway.
This page is for Lauderhill homeowners who have CSI products – windows, skylights, or roof glazing – that are leaking, binding, fogging, or simply not closing the way they used to. We’re an independent CGI service provider, which means we diagnose the failure honestly and give you options other than full replacement when the unit itself is still sound. Dale Kessler grew up off Oakland Park Boulevard, and our techs know what South Florida humidity and storm cycles do to roof penetrations over two decades.
Key Takeaways
- CGI roof repair in Lauderhill costs $350-$1,800 on average, with most jobs completed in one visit.
- We are an independent CGI service provider, not a manufacturer warranty agent, and we give you straight answers about what your warranty does and doesn’t cover before we touch the unit.
- CGI’s known roof-related failure points are roof curb flashing, impact-glass seal failure around the edges, and corroded hinge hardware on operable roof windows, each of which has a specific fix that doesn’t always require replacing the glass.
- We match OEM parts where they matter and quality aftermarket where they’re better, and we tell you which is which on the written quote.
- Lauderhill’s wet season punishes old roof flashings, and we see certain CGI series show seal fatigue earlier than expected in homes within four miles of the Turnpike corridor.
How CGI Products Fail - and How We Fix Them
- CGI Series 7100 roof windows: seal failure at the glass edge. The 7100 uses a laminated impact glass unit that’s tough, but the edge seal is the weak point after 12 to 18 years of Lauderhill sun. When the seal lets go, you get fogging between the panes and a slow loss of insulating gas. We see this most often on south-facing roof slopes in the Inverrary and West Ken Lark neighborhoods. The fix is a new insulated glass unit cut to the 7100’s exact frame depth, not a homeowner caulk job. We order the IGU from a Florida fabricator that cuts to CGI’s original glass thickness spec.
- CGI Estate Series skylights: curb flashing separation. The Estate Series sits on a site-built curb, and the original installer’s flashing is usually the first thing to fail, not the CGI unit itself. In Lauderhill’s afternoon downpour cycles, water gets driven under the flashing lip and wicks along the curb, and the homeowner sees a ceiling stain six feet from the skylight. Our fix is curb re-flashing with a two-part sealant system rated for Florida wind-driven rain, then a water test before we put the interior trim back.
- CGI operable roof windows: corroded hinge and latch hardware. Any operable roof window that’s been through ten or more wet seasons will show corrosion on the hinge pins and latch striker. This is more than a nuisance – a corroded hinge on an impact-rated unit changes the way the sash seats against the weatherstripping, and that’s when you get air leaks and water intrusion at the corners. We keep replacement hinge and latch kits for the common CGI roof window models on the truck, and we’ll replace them in the same visit when the frame is still square.
- CGI fixed roof glazing: stress cracks from settlement. We see this on larger fixed CGI roof panels in older Lauderhill homes where the roof structure has settled or the original install didn’t allow for thermal movement. The crack starts at the frame corner and runs inward, and the homeowner writes it off as impact damage when it’s actually a binding issue. The glass has to be replaced, but first we correct the frame alignment so the new panel isn’t put under the same stress. If we skip that step, you’ll be calling us again in three years.
- CGI 8100 Series: weep system blockage. The 8100’s frame has a weep system designed to channel water out of the track, and in Lauderhill they fill with pollen, grit, and debris from oak trees. Once they’re blocked, water pools in the track and eventually finds its way under the sill. The telltale is water staining at the interior sill corners without any obvious leak source. We clear the weeps, check the sill pan, and re-seal the interior lap joints, which is a $200 to $400 repair versus a $2,500+ window replacement.
Our CGI Roof Repair Process
- 1
You call, a live person answers. No voicemail tree, no callback form. We ask the address, the product type, and what you’re seeing. We’ll tell you then whether it sounds like a seal failure, a flashing issue, or a frame problem, and we’ll schedule a time that works. A real person answers the phone 24 hours a day, seven days a week.
- 2
The tech measures everything before touching anything. Our uniformed technician pulls the interior trim or accesses the roof penetration, measures the glass thickness, frame depth, and opening dimensions, then checks the curb condition and flashing lap. We measure every opening twice – the second measurement catches what the first one misses.
- 3
You get the parts decision on paper. We price the OEM path and the quality-aftermarket path side by side where both exist. For CGI glass, we typically use OEM-spec laminated glass because the impact rating depends on exact thickness and interlayer. For hardware and sealant, we sometimes recommend a well-proven aftermarket option that outperforms the original. If the spec sheet doesn’t back it up, we don’t say it.
- 4
The repair happens in one visit. Most CGI roof repairs on windows and skylights are done the same day. We protect the interior, make the repair, clean the track, adjust the sash, and test the unit through a full open-close cycle. If it’s a roof penetration, we run water over it before we pack up.
- 5
Both warranty layers go into writing before we leave. The manufacturer warranty on the parts or glass unit gets registered, and our Done Right Promise applies to the workmanship. No paperwork fights, no arguing – if it’s not done right, we make it right.
What CGI Roof Repair Costs in Lauderhill
- Weep system cleaning and sill re-seal: $200-$400
- Weatherstripping and gasket replacement on one unit: $250-$550
- Hinge/latch hardware replacement on an operable roof window: $350-$700
- Insulated glass unit replacement (seal failure): $500-$1,200 per unit
- Curb re-flashing on a CGI skylight: $600-$1,200
- Full frame rebuild or replacement of a roof window or skylight: $1,200-$1,800+
What moves the price is access – a second-story roof window costs more than a ground-level unit – and whether the glass unit is still manufactured. Some older CGI roof window glass sizes are no longer in production, which pushes you toward custom fabrication. The estimate is free, it’s in writing, and the price on the quote is the price on the bill. No change orders, no surprises. Call (850) 303-7739 and we’ll put exact numbers on your repair.
Why Lauderhill Homeowners Call TruePane Windows & Doors for CGI Work
We’ve served Broward County homeowners since 2008, and Dale Kessler has spent the better part of three decades measuring, setting, and sealing windows and doors across this county. Our techs are background-checked and uniformed, and they treat your house the way they’d treat their own mother’s. When a customer calls about a leaking roof window, they’re calling because water is coming into their home, not because they want a sales pitch. We honor that by giving them an honest read on what’s wrong and what it costs to fix.
CGI is one of the manufacturer lines we’re authorized to install, and we also work with PGT, CWS, ES Windows, and ECO Window Systems, so when a Lauderhill home has a mix of brands across different openings, one crew can handle all of it. Every job is under the Keystone Standard: both warranty layers registered in writing before the truck leaves the driveway, with durations stated. And the Done Right Promise means if the repair doesn’t hold, we come back and make it right – no paperwork, no arguing.
FAQs
No, not when the repair is done correctly with OEM-spec parts. The warranty is voided by unauthorized modifications, not by qualified service. We’re an independent CGI service provider, so we don’t represent the manufacturer’s warranty, but we document every repair and use parts that meet CGI’s original specifications where it matters, which keeps your warranty intact.
We schedule service calls throughout the week across Lauderhill and Broward County, and a live person answers the phone 24/7 so you’re never left waiting on a callback to find out when we can get there. When water is actively coming through a roof penetration, we treat it as a priority. Call (850) 303-7739 and we’ll tell you exactly what our schedule looks like.
We repair older CGI models. The hardware on the Estate Series and Series 7100 and 8100 has been in production long enough that some parts are still available, and when they are not, we source or fabricate equivalents that match the original spec. For glass on discontinued sizes, we work with a Florida fabricator that cuts to the original thickness and lamination spec, so an older unit doesn’t automatically mean a full replacement.
We tell you to replace the unit when the frame is out of square from settlement or storm damage, the glass is cracked through both panes of the lamination, or the cost of bringing the old unit back to spec exceeds about 60 percent of a new unit, because at that point the replacement buys you another 15 to 20 years. We’ll quote both paths side by side on paper so you can see the real numbers.
No. The quote you approve is the price you pay. If we find something unexpected during the repair, we stop, walk you through it, and get your approval in writing before we proceed. We’ve been doing this since 2008, and a square deal is the only way we work.
Ready to get your CGI roof repair in Lauderhill handled right? Call (850) 303-7739 for a free estimate. A live person answers, we’ll give you a straight read on what’s wrong, and we’ll stand behind the work in writing.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Lauderhill and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.