Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Windows & Doors in Sunrise, FL | TruePane Windows & Doors
We provide independent Therma-Tru windows and doors service across Sunrise, FL, and we’re not a manufacturer affiliate or an authorized dealer. What sets our Therma-Tru work apart here is that we’ve disassembled, re-hung, and retrofitted these door systems in hundreds of Sunrise homes, so we know exactly how their fiberglass skins, multipoint locksets, and corner seals behave after decades in shifting, high-moisture Everglades soil. If your Therma-Tru entry door binds in July or your sidelite shows daylight at the miter, call (850) 303-7739 and we’ll come take a look.
Why Sunrise Residents Choose Us for Therma-Tru Service
Dale Kessler grew up off Oakland Park Boulevard in Lauderhill, where his father spent weekends caulking and reglazing windows for neighbors who couldn’t afford to call anyone. Dale picked up the basics before he was old enough to drive, then sharpened the technical side at Broward College’s construction trades program in the early 1990s. For the better part of three decades he’s measured, set, and sealed windows and doors across Broward County, and his specialty is impact-rated installations that hold their specs long after the permit card comes down. That’s the hands-on background behind every Therma-Tru door we service in Sunrise.
We’re local to Sunrise, not a franchise playbook with a different tech every visit. Our background-checked, uniformed technicians measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves the driveway. When a Sunrise homeowner calls about a Therma-Tru multipoint lock that won’t throw, the person answering already knows what a Sunrise slab-settled rough opening looks like.
Common Therma-Tru Windows & Doors Problems We Solve in Sunrise
- Hardened bottom sweeps and corner seal pads. Older Therma-Tru sills use rubber compounds that harden and crack in Sunrise’s persistent ground-level humidity. Once that corner seal fails, afternoon thunderstorms push water up under the threshold and into the subfloor. We replace the sweep and seal pads with current Therma-Tru parts before the damage spreads.
- Multipoint locks that won’t throw the top or bottom bolts. Classic-Craft doors in Sunrise sit on CBS slabs that settle unevenly as the organic soil below shifts. The lock housing moves out of alignment, and the shoot bolts stop lining up with the strike plate. We re-square the opening and reset the lock so all three points engage.
- Factory-glazed sidelite frames separating at the miters. Smooth-Star units with factory glazing show hairline gaps at the miter joints when the stucco opening shifts. You’ll see daylight through a gap that wasn’t there at install. We disassemble, clean, re-bed, and re-seal the joint with materials rated for our humidity.
- Weatherstripping that turns tacky and tears at the hinge-side kerf. Fiber-Classic weatherstripping degrades faster in moist air than in better-drained soil cities. The strip gets gummy, then tears, then catches the door edge every time it closes. We replace it with the correct Therma-Tru kerf profile.
- Warped door jambs from ground moisture. Sunrise homes built on former Everglades drainage land see constant ground-level moisture wicking into door frames. Wood jambs warp, fiberglass doors bind, and the reveal goes off. We address the moisture entry point and re-hang the slab true.
Therma-Tru Service in Sunrise: What Local Conditions Mean for Your Equipment
Sunrise was built out almost entirely between the 1960s and 1980s on drained Everglades wetland. The soil here is organically rich and holds moisture year-round, which means it shrinks and swells with the seasons. Foundation slabs shift. Rough openings go out of square. For Therma-Tru door owners, that means a door that hung perfectly for fifteen years can start binding at the top corner after a wet summer, and no amount of hinge adjustment will fix it because the frame itself has moved. In Sunrise Golf Village and the other 1970s villa communities, we see this constantly: the slab settles a fraction of an inch, the multipoint lock housing torques, and the homeowner assumes the door is warped. It usually isn’t. The rough opening is out of true. We fix the opening, then re-hang the door. If the spec sheet doesn’t back it up, we don’t say it.
Add in Broward County’s high-velocity hurricane zone requirements and you get a service picture that’s specific to Sunrise. Any permitted replacement needs Florida Product Approval impact-rated openings, and many HOA-governed communities layer deed restrictions on frame color and grid pattern on top of that. A contractor who treats Sunrise like an unincorporated county pocket will get a door approved by the city but rejected by the association. We’ve navigated both approvals enough times to know the sequence by heart.
Therma-Tru Models & Products We Service in Sunrise
Our crews work on the full range of Therma-Tru residential door lines: the Classic-Craft Fiberglass Entry Door Collection, Smooth-Star Fiberglass Entry Doors, the Fiber-Classic Mahogany Collection, and Pulse Series Entry Doors. We default to genuine Therma-Tru replacement parts whenever a door can be kept, because their proprietary corner seals and multipoint rack extenders rarely interchange with aftermarket versions. For discontinued hardware or severely rotted frames, we quote a full replacement with a current Therma-Tru model rather than patch a door that will fail again within two hurricane seasons. We keep the most common Therma-Tru threshold caps, corner seal pads, and weatherstripping profiles stocked for fast Sunrise turnaround, and anything we don’t have on the truck we can source in a day or two.
Therma-Tru Service Pricing in Sunrise
What you’ll pay depends on the failure and the door. A bottom sweep and corner seal pad replacement on a Therma-Tru entry door in Sunrise typically runs $120 to $260, parts included. Re-aligning a multipoint lock that won’t throw the top or bottom bolts usually falls between $180 and $340, more if the rough opening needs re-squaring with a sill shim and steel framing plate. A full Therma-Tru replacement door with Florida Product Approval impact rating and HOA color-match prefinish starts around $2,800 and goes up based on glass, grille pattern, and hardware. Every estimate is written line-item, free, and includes both warranty layers registered in writing before we leave the driveway. Call (850) 303-7739 to schedule yours.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Therma-Tru Windows & Doors in Sunrise
Yes, on both counts. Broward County requires a permit with Florida Product Approval documentation for any impact-rated door replacement, and most Sunrise HOA-governed villa communities require the frame color and grid pattern to match the original before the association signs off. We handle the permit paperwork and order the door prefinished to spec so both reviews clear without a second appointment. Call (850) 303-7739 with your community’s requirements and we’ll walk through what applies to your street.
In most Sunrise homes, yes. The usual cause is slab settlement shifting the rough opening, which torques the lock housing so the shoot bolts miss the strike plate. We remove the door, re-square the opening, reset the lock with genuine Therma-Tru rack extenders, and test all three points before we leave. If the hardware is too far gone, we quote a replacement multipoint set. Call (850) 303-7739 for an exact quote.
For a Sunrise CBS home, we usually recommend the Classic-Craft Fiberglass Entry Door Collection with an impact-rated glazing package, because it carries the Florida Product Approval ratings Broward County requires and its fiberglass skin resists the ground-level humidity that warps wood jambs here. The Pulse Series is a strong choice when decorative glass is a priority. We’ll quote both side by side on paper so you see exactly what you’re buying.
Fiberglass doesn’t warp on its own. What you’re seeing is the door binding because the rough opening has moved, and in Sunrise that movement comes from the high-moisture, organically rich soil under the slab. The door is square; the opening isn’t. We re-square the opening with a pressure-treated sill shim and steel framing plate, then re-hang the slab. The door closes true, and it stays that way.
Only if the glass unit is impact-rated and listed on the Florida Product Approval for that door model. A standard decorative glass insert does not meet Broward County’s high-velocity hurricane zone requirements. We specify Therma-Tru units with approved impact glazing so your front entry passes both inspection and any HOA review. Call (850) 303-7739 and we’ll price the compliant option for your opening.
Service Areas Near Sunrise
Our Therma-Tru service covers Sunrise and the surrounding Broward communities. If you’re in a neighboring city, we handle the same door issues there as we do here. We also provide Therma-Tru service in Lauderhill and Therma-Tru service in Lauderdale Lakes. Our full Sunrise service area page lists every community we cover, and our Therma-Tru sales & service page goes deeper into the brand if you want more detail before calling.
Book Your Therma-Tru Service in Sunrise Today
At a townhome in Sunrise Golf Village, our tech found a Classic-Craft entry door that had been sticking so badly the homeowner had stopped using it. The slab had settled about 3/8 inch on the hinge side, pushing the multipoint lock housing out of alignment. We removed the door, re-squared the rough opening with a pressure-treated sill shim and steel framing plate, then reinstalled the slab with a genuine Therma-Tru adjustable threshold and new corner seal pads. The HOA had already approved the original stain color, so the repair was done before the association’s monthly walkthrough, no second approval needed. That’s the standard we bring to every Therma-Tru door in Sunrise.
A live person answers the phone 24 hours a day, 7 days a week. Call (850) 303-7739 for a free written estimate, and we’ll have a technician out to your Sunrise home to measure, diagnose, and quote your Therma-Tru service the same day.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Sunrise and Broward County since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.