Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Why Lauderhill Homeowners Choose Mr-Glass Windows & Doors
We’re an independent Mr-Glass service provider in Lauderhill, Florida, and we repair and replace Mr-Glass windows and doors throughout Broward County. Our team has worked on these specific product lines for over a decade, which means we know the hardware, the glass packages, and the installation quirks that factory-authorized dealers rarely see once the warranty clock runs out. We’re not affiliated with or authorized by Mr-Glass. What we are is the local crew that fixes their windows correctly, using genuine parts when available and honest alternatives when discontinued hardware leaves no other choice. Call (850) 303-7739 to talk to someone who actually knows Mr-Glass products.
Lauderhill’s housing stock makes Mr-Glass service work a steady trade here. The 1960s and 1970s CBS homes and the thousands of condo units in Century Village Lauderhill still hold original aluminum and vinyl openings that predate current code. When a Mr-Glass window fails in this climate, the heat and humidity don’t wait for you to get around to it. We know the failure patterns because we see them every week in this city.
Why Trust TruePane Windows & Doors for Your Mr-Glass Windows & Doors?
Dale Kessler grew up off Oakland Park Boulevard in Lauderhill. His father spent weekends caulking and reglazing windows for neighbors who couldn’t afford a glazier, and Dale picked up the basics before he was old enough to drive. He sharpened the technical side at Broward College’s construction trades program in the early 1990s, and for the better part of three decades he has measured, set, and sealed windows and doors across Broward County. His specialty is impact-rated installations that hold their specs long after the permit card comes down. That history matters when a Mr-Glass window needs work, because nobody learns the quirks of a product line from a spec sheet alone.
Our technicians have spent years inside Mr-Glass frames. They know which balance systems fail first, which seals go cloudy in this humidity, and which roller assemblies wear out on Lauderhill’s older jalousie and sliding window inventory. We use genuine Mr-Glass components whenever the manufacturer still supplies them. When a part has been discontinued, we source equivalent OEM-spec aftermarket hardware that preserves fit and finish. And we register both warranty layers in writing before the truck leaves your driveway, per The Keystone Standard. If the spec sheet doesn’t back it up, we don’t say it.
Common Mr-Glass Windows & Doors Problems We Fix in Lauderhill
- Worn spiral balances in Mr-Glass 7700 single hung sashes. The 7700 series uses a spiral balance system that loses tension over time, especially in Lauderhill’s heat. When that happens, the sash drops hard the moment you release it. We replace the balance assemblies and re-tension them so the window stays where you put it. It’s a same-visit fix in most cases.
- Fogging between panes in Mr-Glass 8800 double hung insulated glass units. The 8800 double hung carries a sealed IG unit, and in this climate, a failed edge seal pulls moisture in fast. The fix is a replacement IG unit, not a full window. Last month our tech replaced a fogged IG unit in a Mr-Glass 8800 for a Lauderhill homeowner off NW 19th Street. The original seal had failed. We ordered a matching Low-E argon-filled unit, rebuilt the sash, and reinstalled it the same day, restoring clear glass and thermal performance.
- Roller wheel failures and track misalignment in Mr-Glass 9900 horizontal sliders. The 9900 series rides on roller assemblies that collect grit and harden in this heat. A window that drags or jumps off its track usually has a seized wheel or a bent channel. We replace the rollers, clean the track, and adjust alignment so the panel glides instead of fighting you.
- Cracked vinyl corners on Mr-Glass casement windows. Casement frames take torque at the corners every time the crank closes. On older Mr-Glass casement windows, that stress shows up as hairline cracks at the welded corners. Water gets in, the frame bows, and the sash stops sealing. Depending on the crack, we can sometimes reinforce and reseal; a deep structural split usually means a new sash or full replacement.
- Failed weatherstripping and air leaks on Mr-Glass frame corners. In Lauderhill’s year-round humidity, weatherstripping hardens and shrinks within a few years. That is not a Mr-Glass defect. It is physics. We replace the stripping with a material rated for South Florida UV exposure, which gets the seal tight again and reduces the draft you feel in the rainy season.
Mr-Glass Parts & Our Repair-vs-Replace Approach
We stock common Mr-Glass replacement parts locally so most repairs happen in a single visit. Spiral balances for the 7700 series, roller assemblies for the 9900, weatherstripping profiles, sash locks, and crank hardware for casement models are kept on the truck. For IG units, we order the exact glass package specified for the window, which takes a few days on average. Genuine Mr-Glass components get used whenever the manufacturer still produces them. When a part is long discontinued, we use equivalent OEM-spec aftermarket hardware that preserves the original fit and finish rather than forcing a universal part that never sits right.
Repair makes sense when the frame is sound and the glass is intact. We recommend replacement when rot has set into the frame, when impact damage has compromised the structural integrity, or when a failed seal has let moisture sit long enough to discolor the glass and corrode the spacer. We will tell you which one applies to your window and why, with numbers, before any work is approved. Call (850) 303-7739 for an honest read on your Mr-Glass window.
Our Mr-Glass Service Process - Step by Step
- 1
Diagnosis. We inspect the sash, frame, glass package, and hardware. A Mr-Glass 7700 that drops has a balance problem; a 9900 that drags has a roller problem. We identify the cause, not just the symptom, and we document it for you.
- 2
Repair, rebuild, or replace. We use genuine Mr-Glass parts when available, OEM-spec equivalents when not. Discontinued hardware does not mean a dead window. We rebuild sashes in the shop and reinstall them on site.
- 3
Function and seal test. Every repaired or installed window gets cycled, checked for square, and inspected for air or water penetration. The pane has to rest true. If it does not, the job is not done.
- 4
Warranty registration. Both warranty layers get registered in writing, with durations stated, before we leave the driveway. That is The Keystone Standard. No paperwork fights later.
Mr-Glass Products We Service & Install in Lauderhill
We service and install the Mr-Glass 7700 single hung, the 8800 double hung, the 9900 horizontal roller, and the Premium Impact Casement. That covers impact-resistant windows, single and double hung configurations, and horizontal roller windows, which are the most common Mr-Glass products in Lauderhill’s CBS housing stock. We stock hardware for all four lines and can source full replacement windows when an upgrade is the better path. Lauderhill sits inside Broward County’s High-Velocity Hurricane Zone, so any impact window we install is checked against Florida and Miami-Dade product approval. We do not cut corners on that.
We Also Service These Brands
Mr-Glass is one part of our trade. We also service and install PGT, CGI, CWS, and ES Windows products, which matters when a home has mixed-brand openings. A Lauderhill house may have Mr-Glass sliders on the back and PGT casements on the front, and we handle both without making you call two companies.
FAQs - Mr-Glass Windows & Doors Service in Lauderhill
The spiral balance assemblies on the 7700 series lose tension with age, and Lauderhill’s heat accelerates the wear. When the balance can’t hold the sash weight, the window drops on its own. We replace the balances and re-tension them to match the sash weight. Call (850) 303-7739 for a service visit.
Fogged glass in an 8800 means the edge seal on the insulated glass unit has failed and moisture got between the panes. You need a new IG unit, not a full window. We order the matching Low-E argon-filled unit, rebuild the sash, and reinstall it. Same-day service for Lauderhill homes is often possible once the glass arrives.
Usually the roller wheels have seized or the track has collected enough grit to bind the panel. We replace the rollers and clean or realign the track. If the wheel assembly has corroded, which happens in this humidity, a full roller replacement is the fix. We’ll diagnose it on the spot.
Any impact window or door we install in Lauderhill is checked against Florida and Miami-Dade product approval requirements. Lauderhill is in Broward County’s HVHZ, and we do not install impact-rated products without the documentation to back them. If the spec sheet doesn’t back it up, we don’t say it.
Yes. You can replace individual windows or doors with modern Mr-Glass energy-efficient models, or with another manufacturer line we carry, as long as each new opening meets current HVHZ code. We quote manufacturer lines side by side on paper so you see exactly what you are buying. Call (850) 303-7739 to talk through your options.
No. We are an independent Mr-Glass service provider in Lauderhill, not a factory-authorized dealer. That independence means we make repair recommendations based on what is best for the homeowner and the condition of the window, not on a manufacturer’s replacement quota or warranty pressure. We have worked on Mr-Glass products for over a decade and know their hardware as well as anyone.
Service pricing depends on what failed. A balance or roller replacement on a Mr-Glass 7700 or 9900 typically runs less than $300 including parts and labor. A full IG unit replacement on an 8800 double hung runs higher because the glass package itself is the cost driver. We give you a written line-item quote before any work starts, and we honor it. Call (850) 303-7739 for an exact number on your window.
Book Your Mr-Glass Service in Lauderhill, FL
If you have a Mr-Glass window or door that is fogged, dropping, dragging, or just not sealing right, call (850) 303-7739. A live person answers, 24 hours a day, seven days a week. We’ll schedule a visit, diagnose the problem, and give you a written quote before any work begins.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lauderhill since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After